Бесплатная альтернатива. Проект Vasfmc-2.0a9

August 8, 2012

Как научиться? Щас умру от зависти :good:

Да как, читать Навигацию и Самолётовождение Там часто предлагаются интересные маршруты - пробовать повторить. Там же есть и отчёты, как люди летали - оттуда можно почерпнуть методику подготовки таких полётов (расчёты, и прочее). Да я и сам в этой области ещё нуб нубом, ну может быть продвинутый нуб

August 8, 2012

А к дефолту 747 эта FMC не подходит? :facepalm:

Если дать vasfmc управлять автопилотом, то всё управление автопилотом надо выполнять только из vasfmc (руками mcp 747 в симе не трогать)

Либо можно отключить в vasfmc функцию автопилота, тогда vasfmc будет запихивать данные в дефолтную fmc сима, но тогда мы лишаемся всяких полезных функций типа vnav, которые умеет vasfmc но не умеет симовская.

August 8, 2012

Надо играться с настройками, а их там туча. Но, думаю, если посидеть, почитать мануал и поиграться с настройками, то всё получиться - прога грамотная.

Надо вот чего попробовать в настройках:

A/THR MODE sets if either the FLIGHTSIM or VASFMC shall handle the autothrottle. The VASFMC mode may not work with all aircraft models.
AIRBUS A/THR When set to yes, your throttle levelwill behave liks in the real Airbus with detends for IDLE, CLIMB, FLEX/MCT and TOGA.
AIRBUS FLAPS en/disables Airbus like flap handling, e.g. flaps "1" and "1+F" handling

Последняя опция относится к закрылкам, ну уж если летаем на Боинге, то тоже надо поменять.

Да как, читать Навигацию и Самолётовождение Там часто предлагаются интересные маршруты - пробовать повторить. Там же есть и отчёты, как люди летали - оттуда можно почерпнуть методику подготовки таких полётов (расчёты, и прочее).

Будем стараться. Спасибо!

August 11, 2012

У меня было подозрение, что это баг qpac'а, потому как за полёт по маршруту отвечает qpac. Я об этом написал на x-plane.org, но мне Торстен сказал что "моя хата с краю" - косячит vasfmc. В общем никак не дойдут руки протестировать без vasfmc. Если есть возможность, создайте флайтплан в vasfmc, сохраните его из дефолтной fms и попробуйте без vasfmc совершить полёт. Если вылезет баг, то можно будет таки надеяться на фикс.

Торстен, похоже, прав. Добрался я до модельки X737 Boeing - та же самая петрушка. Возможно, это какая-нить фишка vasFMC, в том смысле, что настроить нужно. Но в настройках пока ничего подходящего не нашёл. Баг вылезает обычно после прохождения очередной точки и, как я заметил, или мне кажеться, когда самолёт не проходит на самой точкой, а чуть с отклонением. При этом FMC-шка не зачитывает прохождение, и как результат, не переключается на следующую и самолёт начинает выписывать замысловатые фигуры. Потом я тыкаю её носом куда дальше лететь нужно и т.д.

August 14, 2012

а vasFMC лучше чем X-FMC? Хочу нормально летать на А320(QPAC), а то во время полета выбрал STAR и самолет начал куда-то сворачивать с трассы на автопилоте и с NAVом, а показывает все ок на дисплее.

August 14, 2012

а vasFMC лучше чем X-FMC? Хочу нормально летать на А320(QPAC), а то во время полета выбрал STAR и самолет начал куда-то сворачивать с трассы на автопилоте и с NAVом, а показывает все ок на дисплее.

в плане фич vasfmc просто идеален, но описаный глюк тоже имеется

August 15, 2012

что-то не нашел mac версию и как ставить на mac. Может кто знает?

Да я бы так летал на x737 все время, но для IVAO с запуском геморой пипеццц)

August 15, 2012

в плане фич vasfmc просто идеален, но описаный глюк тоже имеется

Это чтобы вирпил не расслаблялся и не оставлял симулятор наедине с сетью :sarcastic:

что-то не нашел mac версию и как ставить на mac. Может кто знает?

Можно из-под вайн запустить версию для винды это раз. Вроде как здесь (кстати, на австрийском сайте Ватсим) лежит пакет для мака - это два.

August 15, 2012

Это чтобы вирпил не расслаблялся и не оставлял симулятор наедине с сетью :sarcastic:

Сейчас слетал по маршруту созданному в vasfmc, но с закрытым vasfmc - никуда не уводит. Может быть там какой-то конфликт между vasfmc и xplane возникает? Или может просто повезло на этот раз...

August 15, 2012

А десятка из-за плагина Васки ни у кого не вылетает? И как с этим бороться? Началось после какой-то беты...

August 15, 2012

А десятка из-за плагина Васки ни у кого не вылетает? И как с этим бороться? Началось после какой-то беты...

не вылетает (собственно там сам плагин - scs только.

August 18, 2012

не вылетает (собственно там сам плагин - scs только.

Как только ставлю эту папку в Плагинс - сим не грузится((((

August 18, 2012

А можно просто вбить маршрут и все? А дальше уже самому всем заправлять?

August 19, 2012

А можно просто вбить маршрут и все? А дальше уже самому всем заправлять?

К сожаления, без ФМС в зоне RNAV (читай, во всей Европе) Вы не полетаете - не сможете выдержать точность самолетовождения на маршруте, зоне ожидания, заходе. Так что это не приблуда, а суровая необходимость))). И все это должно оперативно меняться.

Повторяю вопрос: А десятка из-за плагина Васки ни у кого не вылетает? И как с этим бороться? Началось после какой-то беты...64 бит...

August 19, 2012

Привет всем. После установки в версии 2.1. пустая папка navdata. Как добавить туда все аэропорты и точки?

В версии 2.09а что то есть, но многих аэропортов просто не находит. Можно ли добавить? Или может ли кто то выложить готовую папку?

August 19, 2012

Привет всем. После установки в версии 2.1. пустая папка navdata. Как добавить туда все аэропорты и точки?

В версии 2.09а что то есть, но многих аэропортов просто не находит. Можно ли добавить? Или может ли кто то выложить готовую папку?

На известном трекере скачайте последний AIRAC и запустите установщик для ВАС ФМС

August 19, 2012

Как только ставлю эту папку в Плагинс - сим не грузится((((

log.txt покажите.

August 19, 2012

Вот сегодня пробовал первый полет с помощью vasFMC. Гемороя конечно ужасно много было! Летел ULLI - UUEE. Выбрал очень хороший план с 1208 базы, СИД и СТАР. Потом по туториалу в ютубе занимался остальными настройками.

1)FMC почему-то не выставил скорости и высоту на каждой точке, поэтому когда уже должен был быть на высоте 5000, я был на 25000+ :DDD В ручную менять все было очень не просто, потому что в самом симе ничего не регулируется(когда в X-FMC можно было вырубить "AP" и сделать все ручками, так же летя просто по NAVу).

2)Летел на QPAC A320 и очень часто, не знаю почему, сносило с трассы маршрута по HDG, когда стоял NAV, видимо когда я что-то менял в настройках скоростей, высоты в самом vasFMC и приходилось использовать DIRECT и в итоге почти весь полет коту под хвост, а вместо 1 часа полета, затратил еще минут 30 на заход хоть как-то.

Так бы летал по X-FMC, но там нельзя выбрать больше 4х SID и STAR(то есть не все, как в vasFMC можно выбрать), может я просто не знаю как)))

Может кто может подсказать со всем, что я перечислил? Спасибо

August 20, 2012

log.txt покажите.

Вот, посмотрите, пожалуйста

log.txt for X-Plane 10.10 Beta 8 X-Plane 101008 compiled on Aug 11 2012 13:17:50

This log file is generated automatically by Laminar Research applications and contains diagnostics about your graphics hardware, installation, and any error conditions.

If you need to contact tech support or file a bug, please send us this file. NOTE: this file is rewritten every time you start ANY of your X-System applications.

If you got a hard system crash and want to report this to Laminar Research, then be sure to send your crash_report.txt file generated by the crash as well!

Windows 5.1 (build 2600/2) Service Pack 2

(This is really Windows Vista, Windows Server 2008 or newer.)

This is a 64-bit version of Windows.

CPU type: 586

Physical Memory (total for computer): 4206702592

Maximum Virtual Memory (for X-Plane only): 4294836224

CPU 0: Intel® Core i7-2640M CPU @ 2.80GHz Speed (mhz): 2793

X-System folder:'C:\X-Plane 10/', case sensitive=0

WGL_ARB_extensions_string WGL_ARB_pixel_format WGL_ATI_pixel_format_float WGL_ARB_pixel_format_float WGL_ARB_multisample WGL_EXT_swap_control WGL_EXT_swap_control_tear WGL_ARB_pbuffer WGL_ARB_render_texture WGL_ARB_make_current_read WGL_EXT_extensions_string WGL_ARB_buffer_region WGL_EXT_framebuffer_sRGB WGL_ATI_render_texture_rectangle WGL_EXT_pixel_format_packed_float WGL_I3D_genlock WGL_NV_swap_group WGL_ARB_create_context WGL_AMD_gpu_association WGL_AMDX_gpu_association WGL_ARB_create_context_profile WGL_NV_float_buffer

WGL_COLOR_BITS_ARB 32.000000

WGL_RED_BITS_ARB 8.000000

WGL_GREEN_BITS_ARB 8.000000

WGL_BLUE_BITS_ARB 8.000000

WGL_ALPHA_BITS_ARB 8.000000

WGL_DEPTH_BITS_ARB 24.000000

WGL_STENCIL_BITS_ARB 8.000000

WGL_SAMPLE_BUFFERS_ARB 0.000000

WGL_SAMPLES_ARB 0.000000

WGL_SWAP_METHOD_ARB 8234.000000

WGL_FRAMEBUFFER_SRGB_CAPABLE_ARB 1.000000

OpenGL Vendor : ATI Technologies Inc.

OpenGL Render : AMD Radeon 6600M and 6700M Series

OpenGL Version : 4.2.11740 Compatibility Profile Context (420)

OpenGL Extensions: GL_AMDX_debug_output GL_AMDX_vertex_shader_tessellator GL_AMD_conservative_depth GL_AMD_debug_output GL_AMD_depth_clamp_separate GL_AMD_draw_buffers_blend GL_AMD_multi_draw_indirect GL_AMD_name_gen_delete GL_AMD_performance_monitor GL_AMD_pinned_memory GL_AMD_query_buffer_object GL_AMD_sample_positions GL_AMD_seamless_cubemap_per_texture GL_AMD_shader_stencil_export GL_AMD_shader_trace GL_AMD_texture_cube_map_array GL_AMD_texture_texture4 GL_AMD_transform_feedback3_lines_triangles GL_AMD_vertex_shader_layer GL_AMD_vertex_shader_tessellator GL_AMD_vertex_shader_viewport_index GL_ARB_ES2_compatibility GL_ARB_base_instance GL_ARB_blend_func_extended GL_ARB_color_buffer_float GL_ARB_compressed_texture_pixel_storage GL_ARB_conservative_depth GL_ARB_copy_buffer GL_ARB_depth_buffer_float GL_ARB_depth_clamp GL_ARB_depth_texture GL_ARB_draw_buffers GL_ARB_draw_buffers_blend GL_ARB_draw_elements_base_vertex GL_ARB_draw_indirect GL_ARB_draw_instanced GL_ARB_explicit_attrib_location GL_ARB_fragment_coord_conventions GL_ARB_fragment_program GL_ARB_fragment_program_shadow GL_ARB_fragment_shader GL_ARB_framebuffer_object GL_ARB_framebuffer_sRGB GL_ARB_geometry_shader4 GL_ARB_get_program_binary GL_ARB_gpu_shader5 GL_ARB_gpu_shader_fp64 GL_ARB_half_float_pixel GL_ARB_half_float_vertex GL_ARB_imaging GL_ARB_instanced_arrays GL_ARB_internalformat_query GL_ARB_map_buffer_alignment GL_ARB_map_buffer_range GL_ARB_multisample GL_ARB_multitexture GL_ARB_occlusion_query GL_ARB_occlusion_query2 GL_ARB_pixel_buffer_object GL_ARB_point_parameters GL_ARB_point_sprite GL_ARB_provoking_vertex GL_ARB_sample_shading GL_ARB_sampler_objects GL_ARB_seamless_cube_map GL_ARB_separate_shader_objects GL_ARB_shader_atomic_counters GL_ARB_shader_bit_encoding GL_ARB_shader_image_load_store GL_ARB_shader_objects GL_ARB_shader_precision GL_ARB_shader_stencil_export GL_ARB_shader_subroutine GL_ARB_shader_texture_lod GL_ARB_shading_language_100 GL_ARB_shading_language_420pack GL_ARB_shading_language_packing GL_ARB_shadow GL_ARB_shadow_ambient GL_ARB_sync GL_ARB_tessellation_shader GL_ARB_texture_border_clamp GL_ARB_texture_buffer_object GL_ARB_texture_buffer_object_rgb32 GL_ARB_texture_compression GL_ARB_texture_compression_bptc GL_ARB_texture_compression_rgtc GL_ARB_texture_cube_map GL_ARB_texture_cube_map_array GL_ARB_texture_env_add GL_ARB_texture_env_combine GL_ARB_texture_env_crossbar GL_ARB_texture_env_dot3 GL_ARB_texture_float GL_ARB_texture_gather GL_ARB_texture_mirrored_repeat GL_ARB_texture_multisample GL_ARB_texture_non_power_of_two GL_ARB_texture_query_lod GL_ARB_texture_rectangle GL_ARB_texture_rg GL_ARB_texture_rgb10_a2ui GL_ARB_texture_snorm GL_ARB_texture_storage GL_ARB_timer_query GL_ARB_transform_feedback2 GL_ARB_transform_feedback3 GL_ARB_transform_feedback_instanced GL_ARB_transpose_matrix GL_ARB_uniform_buffer_object GL_ARB_vertex_array_bgra GL_ARB_vertex_array_object GL_ARB_vertex_attrib_64bit GL_ARB_vertex_buffer_object GL_ARB_vertex_program GL_ARB_vertex_shader GL_ARB_vertex_type_2_10_10_10_rev GL_ARB_viewport_array GL_ARB_window_pos GL_ATI_draw_buffers GL_ATI_envmap_bumpmap GL_ATI_fragment_shader GL_ATI_meminfo GL_ATI_separate_stencil GL_ATI_texture_compression_3dc GL_ATI_texture_env_combine3 GL_ATI_texture_float GL_ATI_texture_mirror_once GL_EXT_abgr GL_EXT_bgra GL_EXT_bindable_uniform GL_EXT_blend_color GL_EXT_blend_equation_separate GL_EXT_blend_func_separate GL_EXT_blend_minmax GL_EXT_blend_subtract GL_EXT_compiled_vertex_array GL_EXT_copy_buffer GL_EXT_copy_texture GL_EXT_direct_state_access GL_EXT_draw_buffers2 GL_EXT_draw_instanced GL_EXT_draw_range_elements GL_EXT_fog_coord GL_EXT_framebuffer_blit GL_EXT_framebuffer_multisample GL_EXT_framebuffer_object GL_EXT_framebuffer_sRGB GL_EXT_geometry_shader4 GL_EXT_gpu_program_parameters GL_EXT_gpu_shader4 GL_EXT_histogram GL_EXT_multi_draw_arrays GL_EXT_packed_depth_stencil GL_EXT_packed_float GL_EXT_packed_pixels GL_EXT_pixel_buffer_object GL_EXT_point_parameters GL_EXT_provoking_vertex GL_EXT_rescale_normal GL_EXT_secondary_color GL_EXT_separate_specular_color GL_EXT_shader_image_load_store GL_EXT_shadow_funcs GL_EXT_stencil_wrap GL_EXT_subtexture GL_EXT_texgen_reflection GL_EXT_texture3D GL_EXT_texture_array GL_EXT_texture_buffer_object GL_EXT_texture_compression_bptc GL_EXT_texture_compression_latc GL_EXT_texture_compression_rgtc GL_EXT_texture_compression_s3tc GL_EXT_texture_cube_map GL_EXT_texture_edge_clamp GL_EXT_texture_env_add GL_EXT_texture_env_combine GL_EXT_texture_env_dot3 GL_EXT_texture_filter_anisotropic GL_EXT_texture_integer GL_EXT_texture_lod GL_EXT_texture_lod_bias GL_EXT_texture_mirror_clamp GL_EXT_texture_object GL_EXT_texture_rectangle GL_EXT_texture_sRGB GL_EXT_texture_sRGB_decode GL_EXT_texture_shared_exponent GL_EXT_texture_snorm GL_EXT_texture_storage GL_EXT_texture_swizzle GL_EXT_timer_query GL_EXT_transform_feedback GL_EXT_vertex_array GL_EXT_vertex_array_bgra GL_EXT_vertex_attrib_64bit GL_IBM_texture_mirrored_repeat GL_KTX_buffer_region GL_NV_blend_square GL_NV_conditional_render GL_NV_copy_depth_to_color GL_NV_copy_image GL_NV_explicit_multisample GL_NV_float_buffer GL_NV_half_float GL_NV_primitive_restart GL_NV_texgen_reflection GL_NV_texture_barrier GL_SGIS_generate_mipmap GL_SGIS_texture_edge_clamp GL_SGIS_texture_lod GL_SUN_multi_draw_arrays GL_WIN_swap_hint WGL_EXT_swap_control

threaded_avail : 1 tex_clamp_avail : 1 add_env_avail : 1

combine_avail : 1 dis_fog_avail : 0 instance_avail : 1

two-sided stencil: 0 separate stencil : 1 tex_comp_avail : 1

vbo_avail : 1 pbo_avail : 1 automini_avail : 1

aniso_avail : 1 fsaa_avail : 1 occlude_avail : 1

sprites_avail : 1

sblend_avail : 1/1

vprog_avail : 1 (2147483647)

fprog_avail : 1 (2147483647/2147483647/2147483647/2147483647)

depth_tex_avail : 1

shad_objs_avail : 1

vshader_avail : 1 (29/16384/128/32/16/16384)

fshader_avail : 1 (16384)

glsl_avail : 1 (4.20/100)

first-gen shaders: 0

gshader_avail : 1 buniform_avail : 1 shad_lod_avail : 1

gpu_shad4_avail : 1 framebuf_avail : 1 frameblit_avail : 1

drawbuf_avail : 1 drawbuf2_avail : 1 tex_float_avail : 1

non_pots_avail : 1 packed_stencil : 1 texture_rg : 1

framebuffer_srgb : 1 copy_buf_avail : 1 pinned_avail : 1 sync/fence : 1

max tex units : 8 (16/16)

max iso filtering: 16.000000

max texture size : 16384 (hardware limit)

max point size : 63.000000

idx in vram : 1

This video card is: DX10 or 11 - With instancing (found glMapBufferRange)

CPU count : 4

Fetching plugins for C:\X-Plane 10/Resources/plugins

Loaded: C:\X-Plane 10/Resources/plugins/PluginAdmin/win.xpl.

CustomSBDatarefs004 - parsing setup file

CustomSBDatarefs004 - parsing successful

Loaded: C:\X-Plane 10/Resources/plugins/CustomSBDatarefs004Win.xpl.

My resources directory is: C:\X-Plane 10\Resources\plugins\X-IvAp Resources\

My AirlinesDB is: C:\X-Plane 10\Resources\plugins\X-IvAp Resources\airlines.dat

My liveries is: C:\X-Plane 10\Resources\plugins\X-IvAp Resources\liveries.txt

X-IvAp: Teamspeak: trying to load sdk from C:\X-Plane 10\Resources\plugins\X-IvAp Resources\TSRemote.dll

X-IvAp: Teamspeak: sdk found and linked

X-IvAp: X-IvAp 0.2.0 for Windows (Rev. 402) ready

X-IvAp: Your ICAO:

X-IvAp: Your Tailnumber:

Loaded: C:\X-Plane 10/Resources/plugins/x-ivap_win.xpl.

==== CHANGING LANGUAGE TO: Русский. ====

ERROR: language file line 'On a Macintosh you can then edit your movies (and add music) with iMovie, which comes free on all new Macs. Editing software is available for sale on Windows machines.====_' missing right side translation.

ERROR: language file line 'Hook this machine up to another with an ethernet cable. If this box is checked, then X-Plane will send an image of the screen at the framerate and resolution specified in the QuickTime settings, compressed with S3TC compression. This could be useful for various research.====Соединить этот компьютер с другим по сети Ethernet. Если эта опция включена, X-Plane будет посылать по сети изображение с монитора, сжатое в формате Quicktime. ' does not have the same trailing spaces.

ERROR: language file line 'QuickTime 6.00 or later IS NOT installed on this machine! You cannot make any movies until you install it! You can download QuickTime for free from:====На вашем компьютере НЕ установлен кодек Quicktime версии 6.00 или выше! Вы не можете делать видеоролики своей игры! Скачать кодек QuickTime можно бесплатно с сайта: ' does not have the same trailing spaces.

ERROR: language file line '|Get the new beta as a demo if available. Leave this off unless you want to participate in the X-Plane beta program!====Получить бета-версию в качестве демонстрационной, если она доступна. Не включайте эту опцию, если вы ен собираетесь участвовать в бета-тестировании X-Plane' does not have its help tips correctly formatted.

ERROR: language file line 'There were errors while installing your scenery.====При установке ландшафтов произошли ошибки.' is a second translation of There were errors while installing your scenery.====При установке новых ландшафтов произошли ошибки.

ERROR: language file line '|Manually set the number of download streams. Typically leave this OFF, and the installer will find the best number of streams for you.====вручную устанавливать количество потоков при загрузке... обычно эту опцию лучше оставлять отключенной. Программа установки сама определит оптимальное количество потоков.' does not have its help tips correctly formatted.

ERROR: language file line 'compressor area|(square feet) { This is the frontal area of the engine compressor... it is 3.14 times the compressor radius squared. This is used to compute the DRAG of the jet engine at low throttle settings.====Площадь компрессора|(кв. футы) { Это фронтальная зона компрессора двигателя, равная произведению числа пи на квадрат радиуса. Эта величина используется для вычисления сопротивления воздуха для реактивного двигателя при низких значениях тяги. ' does not have the same trailing spaces.

ERROR: language file line 'max MP|(at full throttle, redline RPM, sea level, ISA)====макс наддув| (при полной тяге, оборотов двигателя у красной черты, на уровне моря, СМА) ' does not have the same trailing spaces.

ERROR: language file line 'spring k per unit mass lon, lat, vert| { ====к жестк. на 1 массы по осям| { константа динамической жесткости на единицу массы по продольной, поперечной и вертикальной осям' does not have the same trailing spaces.

ERROR: language file line '< Release brakes to take off >====< Отпустите тормоз для взлета > ' does not have the same trailing spaces.

ERROR: language file line '< Space bar to release winch >====< ПРОБЕЛ отсоединить лебёдку > ' does not have the same trailing spaces.

ERROR: language file line '< Space bar to drop >====< Нажмите ПРОБЕЛ для сброса > ' does not have the same trailing spaces.

ERROR: language file line '-your plane team red { ====-ваш самолет команда красных {' does not have the same trailing spaces.

ERROR: language file line '-red| { ====-красный| { ' does not have its help tips correctly formatted.

ERROR: language file line '-thickness|-(ratio) { Thickness ratio is the ratio of how THICK the airfoil is at its thickest point to its CHORD (from leading edge to trailing edge). Typical thickness ratios go from about 0.08 (for a thin, low-drag airfoil) to 0.16 (for a thick, hi-lift airfoil).==== -thickness|-(отношение) { Это отношение максимальной толщины крыла к хорде крыла. Обычно этот параметр составляет от 0.08 (тонкое, малоподъемное крыло) до 0.16 (толстое крыло с большой подъемной силой).' does not have the same leading spaces.

ERROR: language file line 'size|-ratio { How much area does 3-d light 2 cover. The ilght will be half-power at this distance.====Размер|-отнош. { Сколько лампа 2 покрывает 3д площади. ' does not have the same trailing spaces.

ERROR: language file line 'size|-ratio { How much area does 3-d light 1 cover. The ilght will be half-power at this distance.====Размер|-отнош. { Сколько лампа 1 покрывает 3д площади. ' does not have the same trailing spaces.

ERROR: language file line 'size|-ratio { How much area does 3-d light 3 cover. The ilght will be half-power at this distance.====Размер|-отнош. { Сколько лампа 3 покрывает 3д площади. ' does not have the same trailing spaces.

OpenAL vendor : OpenAL Community

OpenAL renderer : OpenAL Soft

OpenAL version : 1.1

OpenAL hardware : DirectSound Software

OpenAL extensions: ALC_ENUMERATE_ALL_EXT ALC_ENUMERATION_EXT ALC_EXT_CAPTURE ALC_EXT_disconnect ALC_EXT_EFX ALC_EXT_thread_local_context AL_EXTX_buffer_sub_data AL_EXT_DOUBLE AL_EXT_EXPONENT_DISTANCE AL_EXT_FLOAT32 AL_EXT_IMA4 AL_EXT_LINEAR_DISTANCE AL_EXT_MCFORMATS AL_EXT_MULAW AL_EXT_MULAW_MCFORMATS AL_EXT_OFFSET AL_EXTX_sample_buffer_object AL_EXT_source_distance_model AL_LOKI_quadriphonic

Initializing off screen mememory.

Initializing off screen mememory complete.

I found the following scenery packages (prioritized in this order):

0 Custom Scenery/Final_Frontier_10-v-100/

1 Custom Scenery/INSIDE_PASSAGE_10-200/

2 Custom Scenery/alaska/

3 Custom Scenery/YSSY Sydney Airport Photo Scenery/

4 Custom Scenery/Aerosoft - EGLL Heathrow/

5 Custom Scenery/d_EDDN_nuernberg/

6 Custom Scenery/d_nuernberg_vfr_overlay/

7 Custom Scenery/zzz_Treelines_Farms_Europe/

8 Custom Scenery/zzz_Treelines_Farms_USA/

9 Custom Scenery/____Aerosoft - EGLL Heathrow/

10 Custom Scenery/_great_britain/

11 Custom Scenery/Aerosoft - EBBR Brussels/

12 Custom Scenery/Aerosoft - EDDF Frankfurt/

13 Custom Scenery/Aerosoft - EDDH Hamburg/

14 Custom Scenery/Aerosoft - EDDK Cologne/

15 Custom Scenery/Aerosoft - EDDM Munich/

16 Custom Scenery/Aerosoft - EDDS Stuttgart/

17 Custom Scenery/Aerosoft - EDDT Berlin Tegel/

18 Custom Scenery/Aerosoft - EDDV Hannover/

19 Custom Scenery/Aerosoft - EDLP Paderborn-Lippstadt/

20 Custom Scenery/Aerosoft - EGBB Birmingham/

21 Custom Scenery/Aerosoft - EGKK London-Gatwick/

22 Custom Scenery/Aerosoft - EGPF Glasgow/

23 Custom Scenery/Aerosoft - EGSS London-Stansted/

24 Custom Scenery/Aerosoft - EIDW Dublin/

25 Custom Scenery/Aerosoft - LEBL Barcelona/

26 Custom Scenery/Aerosoft - LEMD Madrid/

27 Custom Scenery/Aerosoft - LFMN Nice Cote d Azur X/

28 Custom Scenery/Aerosoft - LFPG Paris CDG/

29 Custom Scenery/Aerosoft - LFPO Paris Orly/

30 Custom Scenery/Aerosoft - LPFR Faro/

31 Custom Scenery/Aerosoft - LSGG Genf/

32 Custom Scenery/france/

33 Custom Scenery/_british_isles/

34 Custom Scenery/_NZCH_Christchurch_Airport_Photo_Scenery/

35 Custom Scenery/_NZCH_Christchurch_Area_Photo_Scenery/

36 Custom Scenery/_NZCH_Christchurch_OSM2XP_Building_Enhancement/

37 Custom Scenery/_Oahu_overlays/

38 Custom Scenery/APT GCGM/

39 Custom Scenery/APT GCHI/

40 Custom Scenery/AXX_TNCM/

41 Custom Scenery/copenhagen_photo/

42 Custom Scenery/CZNL_Nelson_Norman_Stibbs/

43 Custom Scenery/D seattlecbdosm4/

44 Custom Scenery/denmark/

45 Custom Scenery/denmark_autogen/

46 Custom Scenery/DM_EGCC_1962/

47 Custom Scenery/EDDG_Muenster/

48 Custom Scenery/EDDH-Hamburg/

49 Custom Scenery/EDDK_Cologne-Bonn/

50 Custom Scenery/EDDL-Duseldorf/

51 Custom Scenery/EDDM_3_1/

52 Custom Scenery/EDDT-Tegel/

53 Custom Scenery/EDDV-Ganover/

54 Custom Scenery/EDDW-Bremen/

55 Custom Scenery/EDDW_Bremen/

56 Custom Scenery/EDHL_Luebeck-Blankensee/

57 Custom Scenery/EDHL_Luebeck-Blankensee overlay/

58 Custom Scenery/EGAC George Best Belfast City Airport/

59 Custom Scenery/EGCN Doncaster-Sheffield/

60 Custom Scenery/EGSS/

61 Custom Scenery/EHAM-Shifol/

62 Custom Scenery/EHRD-Rotterdam/

63 Custom Scenery/ENTC Tromso Langnes/

64 Custom Scenery/EPKK-Krakov/

65 Custom Scenery/ff_library/

66 Custom Scenery/ff_library_extended_LOD/

67 Custom Scenery/finland/

68 Custom Scenery/GlacierMAXX/

69 Custom Scenery/iceland/

70 Custom Scenery/KBNA_Nashville_International_Airport/

71 Custom Scenery/KSEA Demo Area/

72 Custom Scenery/KSEA Demo Terrain/

73 Custom Scenery/LA_BATON_ROUGE_METROPOLITAN_KBTR/

74 Custom Scenery/LEMD_Madrid v10/

75 Custom Scenery/LFPO Paris Orly-v9 & v10/

76 Custom Scenery/LJLJ_Ljubljana-Brnik/

77 Custom Scenery/LJLJ_Ljubljana-Brnik overlay/

78 Custom Scenery/LOWG Graz Thalerhof v1.3/

79 Custom Scenery/LSGG_Geneve_V3.1/

80 Custom Scenery/LSGS Sion_V1.0/

81 Custom Scenery/LTAI-Antalia/

82 Custom Scenery/NCPK -Pukapuka COOK ISLANDS/

83 Custom Scenery/NCPY- Penrhyn COOK ISLANDS/

84 Custom Scenery/NCRK Rakahanga COOK ISLANDS/

85 Custom Scenery/Nepal Lukla VNLK v9/

86 Custom Scenery/norway/

87 Custom Scenery/Oahu/

88 Custom Scenery/Oahu Index Map/

89 Custom Scenery/Oahu User_Guide/

90 Custom Scenery/OpenSceneryX/

91 Custom Scenery/PAAQ/

92 Custom Scenery/R2_Library/

93 Custom Scenery/RAF Cranwell dkm 1.4/

94 Custom Scenery/ruscenery/

95 Custom Scenery/Saskatchewan North/

96 Custom Scenery/SBBR/

97 Custom Scenery/SBSP Congonhas/

98 Custom Scenery/Scenery/

99 Custom Scenery/Scenery-2/

100 Custom Scenery/SCPF Marcel Marchant/

101 Custom Scenery/screenshots/

102 Custom Scenery/sweden/

103 Custom Scenery/Urban_Maxx_Extreme/

104 Custom Scenery/XPIH Cork EICK Ireland r100/

105 Custom Scenery/z El Hierro/

106 Custom Scenery/z La Palma/

107 Custom Scenery/z_G2xpl-overlay_LJLJ_Ljubljana-Brnik/

108 Custom Scenery/z_G2xpl-terrain_LJLJ_Ljubljana-Brnik/

109 Global Scenery/Bug Fixes/

110 Global Scenery/Extra Islands/

111 Global Scenery/X-Plane 10 Global Scenery/

112 Resources/default scenery/1000 autogen/

113 Resources/default scenery/1000 decals/

114 Resources/default scenery/1000 forests/

115 Resources/default scenery/1000 roads/

116 Resources/default scenery/1000 urban terrain/

117 Resources/default scenery/1000 world terrain/

118 Resources/default scenery/700 roads/

119 Resources/default scenery/900 beaches/

120 Resources/default scenery/900 europe objects/

121 Resources/default scenery/900 forests/

122 Resources/default scenery/900 roads/

123 Resources/default scenery/900 us objects/

124 Resources/default scenery/900 world object placeholders/

125 Resources/default scenery/airport decals/

126 Resources/default scenery/airport scenery/

127 Resources/default scenery/default apt dat/

128 Resources/default scenery/default atc/

129 Resources/default scenery/sim objects/

Syntax error - missing closing brace.

(in sign '{@L}C{@R,^lu}8L-26R{^rd' from airport CYSE)

Syntax error - missing closing brace.

(in sign '{@L}C{@R,^lu}8L-26R{^rd' from airport CYSE)

Syntax error - missing closing brace.

(in sign '{@L}C{@R,^lu}8L-26R{^rd' from airport CYSE)

We found a duplicate runway H124H124/H124 vs H124H124/H124 at airport LSGG

Syntax error - unknown glyph at {@R}4L-22R{^u}{@@}F

Syntax error - unknown glyph at 4L-22R{^u}{@@}F

Syntax error - unknown glyph at {@@}F

Syntax error - missing closing brace.

(in sign '{{@R}4L-22R{^u}{@@}F' from airport KBTR)

Syntax error - unknown glyph at {@R}4L-22R{^u}{@@}F

Syntax error - unknown glyph at 4L-22R{^u}{@@}F

Syntax error - unknown glyph at {@@}F

Syntax error - missing closing brace.

(in sign '{{@R}4L-22R{^u}{@@}F' from airport KBTR)

Syntax error - unknown glyph at {@R}4L-22R{^u}{@@}F

Syntax error - unknown glyph at 4L-22R{^u}{@@}F

Syntax error - unknown glyph at {@@}F

Syntax error - missing closing brace.

(in sign '{{@R}4L-22R{^u}{@@}F' from airport KBTR)

Syntax error - unknown glyph at {@R}4L-22R{^u}{@@}F

Syntax error - unknown glyph at 4L-22R{^u}{@@}F

Syntax error - unknown glyph at {@@}F

Syntax error - missing closing brace.

(in sign '{{@R}4L-22R{^u}{@@}F' from airport KBTR)

Could not find tile 48 name is close-frame

(in sign '{@L}Y_{@R}11R' from airport SBBR)

Could not find tile 48 name is close-frame

(in sign '{@L}EE_{@R}29L-11R' from airport SBBR)

Could not find tile 48 name is close-frame

(in sign '{@L}BB_{@R}29L-11R' from airport SBBR)

Could not find tile 48 name is close-frame

(in sign '{@L}Y_{@Y}{^u}U_{^r}K' from airport SBBR)

Could not find tile 48 name is close-frame

(in sign '{@L}U_{@Y}BB{^ru}' from airport SBBR)

Could not find tile 48 name is close-frame

(in sign '{@Y}{^ld}BB_{@L}U_{@Y}{^u}Y' from airport SBBR)

Could not find tile 48 name is close-frame

(in sign '{@L}BB_{@Y}{^r}W{@Y}{^r}K' from airport SBBR)

Could not find tile 48 name is close-frame

(in sign '{@Y}{^lu}W_{@L}U_' from airport SBBR)

Could not find tile 48 name is close-frame

(in sign '{@L}U_{@Y}BB{^rd}_' from airport SBBR)

Could not find tile 48 name is close-frame

(in sign '{@Y}{^l}U_{@L}BB_{@Y}{^u}K_{@Y}Z{^r}_' from airport SBBR)

Could not find tile 48 name is close-frame

(in sign '{@Y}{^l}K__{@L}U_{@Y}{^u}Z_' from airport SBBR)

Could not find tile 48 name is close-frame

(in sign '{@L}U_{@Y}Z{^ru}_' from airport SBBR)

Could not find tile 48 name is close-frame

(in sign '{@Y}{^l}K_{@L}U_{@Y}{^u}Z_' from airport SBBR)

Could not find tile 48 name is close-frame

(in sign '{@Y}{^u}Y_{@L}U_{@Y}K{^r}_' from airport SBBR)

Could not find tile 48 name is close-frame

(in sign '{@L}M_{@Y}{^r}K_' from airport SBBR)

Could not find tile 48 name is close-frame

(in sign '{@Y}{^lu}Z_{@L}K_{@Y}T{^r}_' from airport SBBR)

Could not find tile 48 name is close-frame

(in sign '{@Y}{^l}Z_{@L}K_{@Y}{^ru}EE_{@Y}Y{^r}_' from airport SBBR)

Could not find tile 47 name is open-frame

Could not find tile 48 name is close-frame

(in sign '{@Y}M{^l}___{@L}_K_' from airport SBBR)

Could not find tile 47 name is open-frame

Could not find tile 48 name is close-frame

(in sign '{@Y}{^l}M___{@L}_K_' from airport SBBR)

Syntax error - unknown glyph at R@}17L

Syntax error - missing closing brace.

(in sign '{@L}M{R@}17L' from airport SBSP)

Could not find tile 48 name is close-frame

(in sign '{@B}{no-entry}' from airport KBFI)

Syntax error - unknown glyph at AL}A7

Syntax error - missing closing brace.

(in sign '{@L}A7{@R}13L-31R{@@}31L-13R{AL}A7' from airport KBFI)

ATC audio initialized.

0:00:00.000 D/HID: HID Bridge Running

0:00:00.000 E/APT: Found a bad-location ramp start: SMHO

0:00:00.000 E/APT: Found a bad-location ramp start: NFMO

0:00:00.000 E/APT: Found a bad-location ramp start: NFFR

0:00:00.000 W/ATC: Found overlapping airports with overlapping controller freqs at RJCJ and RJCC!

0:00:00.000 W/ATC: Found overlapping airports with overlapping controller freqs at 9L2 and KEDW!

0:00:00.000 W/ATC: Found overlapping airports with overlapping controller freqs at KNSE and KNDZ!

0:00:00.000 W/ATC: Rewrote RJCJ atc_ControllerRole_Del's freq: 12190 to 11800 for being in conflict!

0:00:00.000 W/ATC: Rewrote RJCJ atc_ControllerRole_Twr's freq: 12620 to 11802 for being in conflict!

0:00:00.000 W/ATC: Rewrote 9L2 atc_ControllerRole_Twr's freq: 12070 to 11800 for being in conflict!

0:00:00.000 W/ATC: Rewrote KNSE atc_ControllerRole_Twr's freq: 12140 to 11800 for being in conflict!

0:00:00.000 D/State: Received: 0:2

0:00:00.000 D/HID: Hardware ADDED(046d, c214) - Logitech Attack 3 at path \\?\hid#vid_046d&pid_c214#7&1cd78fc8&0&0000#{4d1e55b2-f16f-11cf-88cb-001111000030}

0:00:00.000 I/JOY: REGISTER Joystick device: Logitech Attack 3 - VID:1133PID:49684

0:00:00.000 D/HID: BUTTON Added Index: 0 (0009, 0001) for handle: 0x25a1f6e0

0:00:00.000 D/HID: BUTTON Added Index: 1 (0009, 0002) for handle: 0x25a1f6e0

0:00:00.000 D/HID: BUTTON Added Index: 2 (0009, 0003) for handle: 0x25a1f6e0

0:00:00.000 D/HID: BUTTON Added Index: 3 (0009, 0004) for handle: 0x25a1f6e0

0:00:00.000 D/HID: BUTTON Added Index: 4 (0009, 0005) for handle: 0x25a1f6e0

0:00:00.000 D/HID: BUTTON Added Index: 5 (0009, 0006) for handle: 0x25a1f6e0

0:00:00.000 D/HID: BUTTON Added Index: 6 (0009, 0007) for handle: 0x25a1f6e0

0:00:00.000 D/HID: BUTTON Added Index: 7 (0009, 0008) for handle: 0x25a1f6e0

0:00:00.000 D/HID: BUTTON Added Index: 8 (0009, 0009) for handle: 0x25a1f6e0

0:00:00.000 D/HID: BUTTON Added Index: 9 (0009, 000a) for handle: 0x25a1f6e0

0:00:00.000 D/HID: BUTTON Added Index: 10 (0009, 000b) for handle: 0x25a1f6e0

0:00:00.000 D/HID: AXIS Added Index: 0 (0001, 0032) for handle: 0x25a1f6e0. Min/Max 0 - 255

0:00:00.000 D/HID: AXIS Added Index: 1 (0001, 0031) for handle: 0x25a1f6e0. Min/Max 0 - 255

0:00:00.000 D/HID: AXIS Added Index: 2 (0001, 0030) for handle: 0x25a1f6e0. Min/Max 0 - 255

0:00:00.000 D/HID: END HARDWARE

X-IvAp: 8.33 kHz guess: 122.805

X-IvAp: 8.33 kHz guess: 122.810

X-IvAp: 8.33 kHz guess: 122.815

X-IvAp: 8.33 kHz guess: 122.820

X-IvAp: Teamspeak: disconnect from the server

X-IvAp: 8.33 kHz guess: 121.005

X-IvAp: 8.33 kHz guess: 121.010

X-IvAp: 8.33 kHz guess: 121.015

X-IvAp: 8.33 kHz guess: 121.020

0:00:34.484 I/ACF: Loading airplane number 0 with Aircraft/Heavy Metal/B767-300ER PW v9/B767300.acf

X-IvAp: Your ICAO: B763

X-IvAp: Your Tailnumber: N604

Failed to open Aircraft/Heavy Metal/B767-300ER PW v9/B767300_cockpit.obj: the file cannot be opened.

Custom Scenery/zzz_Treelines_Farms_USA/objects/farm4.obj:1068

VT 23.000000 6.000001 21.999998 0.000000 0.000000 0.000000 1.000000 1.000000

WARNING: object Custom Scenery/zzz_Treelines_Farms_USA/objects/farm4.obj has normals of the wrong length.

Custom Scenery/zzz_Treelines_Farms_USA/objects/farm2.obj:61

VT -6.475142 13.544985 -13.351889 0.000000 0.000000 0.000000 1.000000 1.000000

WARNING: object Custom Scenery/zzz_Treelines_Farms_USA/objects/farm2.obj has normals of the wrong length.

Custom Scenery/zzz_Treelines_Farms_USA/objects/farm1.obj:131

VT -15.000001 3.000001 20.000000 0.000000 0.000000 0.000000 1.000000 1.000000

WARNING: object Custom Scenery/zzz_Treelines_Farms_USA/objects/farm1.obj has normals of the wrong length.

Custom Scenery/D seattlecbdosm4/OSMSeattle1ex.obj:902

VT -203.6612 69.6118 -171.7497 0.000 0.000 -0.000 0.6601 0.9618

WARNING: object Custom Scenery/D seattlecbdosm4/OSMSeattle1ex.obj has normals of the wrong length.

WARNING: the object Resources/default scenery/airport scenery/Common_Elements/Miscellaneous/Water_Tank_Elev.obj has a first LOD near distance of 1000 but it should start at 0!

WARNING: tree layer 3002 is unknown.

WARNING: the object Custom Scenery/KSEA Demo Area/KSEA_objects/ConCSlantRoof.obj has a first LOD near distance of 2000 but it should start at 0!

Could not find tile 48 name is close-frame

(in sign '{@B}{no-entry}' from airport KBFI)

Syntax error - unknown glyph at AL}A7

Syntax error - missing closing brace.

(in sign '{@L}A7{@R}13L-31R{@@}31L-13R{AL}A7' from airport KBFI)

WARNING: padding is not integral!

(in sign '{@L}B{@R}34-16{^rd}{@L}{@@}B{@Y,^lu}B' from airport KRNT)

0:00:34.484 I/FLT: Init 0 type: 11

0:00:34.484 I/SCN: DSF load time: 20023 for file Custom Scenery/zzz_Treelines_Farms_USA/Earth nav data/+40-130/+46-124.dsf (0 tris)

0:00:34.484 I/SCN: DSF load time: 4385489 for file Custom Scenery/KSEA Demo Terrain/Earth nav data/+40-130/+46-124.dsf (198770 tris)

0:00:34.484 I/SCN: DSF load time: 19469 for file Custom Scenery/zzz_Treelines_Farms_USA/Earth nav data/+40-130/+46-123.dsf (0 tris)

0:00:34.484 I/SCN: DSF load time: 4100981 for file Custom Scenery/KSEA Demo Terrain/Earth nav data/+40-130/+46-123.dsf (184346 tris)

0:00:34.484 I/SCN: DSF load time: 4369 for file Custom Scenery/zzz_Treelines_Farms_USA/Earth nav data/+40-130/+46-122.dsf (0 tris)

0:00:34.484 I/SCN: DSF load time: 3602030 for file Custom Scenery/KSEA Demo Terrain/Earth nav data/+40-130/+46-122.dsf (190326 tris)

0:00:34.484 I/SCN: DSF load time: 6068 for file Custom Scenery/zzz_Treelines_Farms_USA/Earth nav data/+40-130/+47-124.dsf (0 tris)

0:00:34.484 I/SCN: DSF load time: 3795982 for file Custom Scenery/KSEA Demo Terrain/Earth nav data/+40-130/+47-124.dsf (229133 tris)

0:00:34.484 I/SCN: DSF load time: 10827 for file Custom Scenery/zzz_Treelines_Farms_USA/Earth nav data/+40-130/+47-123.dsf (0 tris)

0:00:34.484 I/SCN: DSF load time: 19709 for file Custom Scenery/D seattlecbdosm4/Earth nav data/+40-130/+47-123.dsf (0 tris)

0:00:34.484 I/SCN: DSF load time: 499251 for file Custom Scenery/KSEA Demo Area/Earth nav data/+40-130/+47-123.dsf (0 tris)

0:00:34.484 I/SCN: DSF load time: 6204753 for file Custom Scenery/KSEA Demo Terrain/Earth nav data/+40-130/+47-123.dsf (243770 tris)

0:00:34.484 I/SCN: DSF load time: 5825 for file Custom Scenery/zzz_Treelines_Farms_USA/Earth nav data/+40-130/+47-122.dsf (0 tris)

0:00:34.484 I/SCN: DSF load time: 4715523 for file Custom Scenery/KSEA Demo Terrain/Earth nav data/+40-130/+47-122.dsf (233697 tris)

0:00:34.484 I/SCN: Preload time: 24091316

X-IvAp: Your Airport: KSEA

X-IvAp: Your GPS destination: E46

X-IvAp: Your FMS destination:

Resources/default scenery/sim objects/dynamic/Nimitz.obj:291

VT 20.592 20.428 68.141 -1.012 -1.012 0.706 0.4747 0.2134

WARNING: object Resources/default scenery/sim objects/dynamic/Nimitz.obj has normals of the wrong length.

Resources/default scenery/sim objects/dynamic/OilPlatform.obj:97371

VT -22.602 30.772 40.718 0.000 0.000 -0.000 0.4477 0.9719

WARNING: object Resources/default scenery/sim objects/dynamic/OilPlatform.obj has normals of the wrong length.

Custom Scenery/zzz_Treelines_Farms_Europe/objects/farm-europe1.obj:59

VT 3.719317 12.160000 7.999997 0.000000 0.000000 0.000000 1.000000 1.000000

WARNING: object Custom Scenery/zzz_Treelines_Farms_Europe/objects/farm-europe1.obj has normals of the wrong length.

Custom Scenery/zzz_Treelines_Farms_Europe/objects/farm-europe3.obj:766

VT 2.574399 3.999999 -18.141859 0.000000 0.000000 0.000000 0.000000 0.000000

WARNING: object Custom Scenery/zzz_Treelines_Farms_Europe/objects/farm-europe3.obj has normals of the wrong length.

Custom Scenery/zzz_Treelines_Farms_Europe/objects/farm-europe8.obj:474

VT -21.779797 7.000000 8.585579 0.000000 0.000000 0.000000 1.000000 1.000000

WARNING: object Custom Scenery/zzz_Treelines_Farms_Europe/objects/farm-europe8.obj has normals of the wrong length.

Custom Scenery/zzz_Treelines_Farms_Europe/objects/farm-europe4.obj:1672

VT 15.364213 12.000000 0.214897 0.000000 0.000000 0.000000 1.000000 1.000000

WARNING: object Custom Scenery/zzz_Treelines_Farms_Europe/objects/farm-europe4.obj has normals of the wrong length.

0:01:32.637 D/State: Received: 0:8

0:02:25.793 I/FLT: Init 0 type: 11

0:02:25.793 I/SCN: DSF load time: 548392 for file Custom Scenery/zzz_Treelines_Farms_Europe/Earth nav data/+40+010/+47+010.dsf (0 tris)

0:02:25.793 I/SCN: DSF load time: 5988697 for file Global Scenery/X-Plane 10 Global Scenery/Earth nav data/+40+010/+47+010.dsf (267579 tris)

0:02:25.793 I/SCN: DSF load time: 147176 for file Custom Scenery/zzz_Treelines_Farms_Europe/Earth nav data/+40+010/+47+011.dsf (0 tris)

0:02:25.793 I/SCN: DSF load time: 4979837 for file Global Scenery/X-Plane 10 Global Scenery/Earth nav data/+40+010/+47+011.dsf (274956 tris)

0:02:25.793 I/SCN: DSF load time: 136574 for file Custom Scenery/zzz_Treelines_Farms_Europe/Earth nav data/+40+010/+47+012.dsf (0 tris)

0:02:25.793 I/SCN: DSF load time: 5017954 for file Global Scenery/X-Plane 10 Global Scenery/Earth nav data/+40+010/+47+012.dsf (255810 tris)

0:02:25.793 I/SCN: DSF load time: 154007 for file Custom Scenery/zzz_Treelines_Farms_Europe/Earth nav data/+40+010/+48+010.dsf (0 tris)

0:02:25.793 I/SCN: DSF load time: 5345985 for file Global Scenery/X-Plane 10 Global Scenery/Earth nav data/+40+010/+48+010.dsf (208036 tris)

0:02:25.793 I/SCN: DSF load time: 176060 for file Custom Scenery/zzz_Treelines_Farms_Europe/Earth nav data/+40+010/+48+011.dsf (0 tris)

0:02:25.793 I/SCN: DSF load time: 917636 for file Custom Scenery/Aerosoft - EDDM Munich/Earth nav data/+40+010/+48+011.dsf (0 tris)

0:02:25.793 I/SCN: DSF load time: 5086474 for file Custom Scenery/EDDM_3_1/Earth nav data/+40+010/+48+011.dsf (0 tris)

0:02:25.793 I/SCN: DSF load time: 5438021 for file Global Scenery/X-Plane 10 Global Scenery/Earth nav data/+40+010/+48+011.dsf (225814 tris)

0:02:25.793 I/SCN: DSF load time: 251627 for file Custom Scenery/zzz_Treelines_Farms_Europe/Earth nav data/+40+010/+48+012.dsf (0 tris)

0:02:25.793 I/SCN: DSF load time: 4421145 for file Global Scenery/X-Plane 10 Global Scenery/Earth nav data/+40+010/+48+012.dsf (190484 tris)

0:02:25.793 I/SCN: Preload time: 16995405

X-IvAp: Your Airport: EDDM

X-IvAp: Your GPS destination: E46

X-IvAp: Your FMS destination:

Clean exit from threads.

0:04:22.100 I/ATC: Airport flow changed at LEMD!

CurFlow: AUTOGEN: West NewFlow: AUTOGEN: South

0:04:22.100 I/ATC: Changing LEMD CabState from 0 to 1

0:04:22.100 I/ATC: All departures are done at LEMD. Advancing...

0:04:22.100 I/ATC: Changing LEMD CabState from 1 to 2

0:04:22.100 I/ATC: All arrivals are done at LEMD. Advancing...

0:04:22.100 I/ATC: Changing LEMD CabState from 2 to 0

0:04:35.234 I/ATC: Airport flow changed at EDPA!

CurFlow: AUTOGEN: West NewFlow: AUTOGEN: East

0:04:35.234 I/ATC: Changing EDPA CabState from 0 to 1

0:04:35.234 I/ATC: All departures are done at EDPA. Advancing...

0:04:35.234 I/ATC: Changing EDPA CabState from 1 to 2

0:04:35.234 I/ATC: All arrivals are done at EDPA. Advancing...

0:04:35.234 I/ATC: Changing EDPA CabState from 2 to 0

0:04:35.234 I/ATC: Airport flow changed at ED01!

CurFlow: AUTOGEN: West NewFlow: AUTOGEN: North

0:04:35.234 I/ATC: Changing ED01 CabState from 0 to 1

0:04:35.234 I/ATC: All departures are done at ED01. Advancing...

0:04:35.234 I/ATC: Changing ED01 CabState from 1 to 2

0:04:35.234 I/ATC: All arrivals are done at ED01. Advancing...

0:04:35.234 I/ATC: Changing ED01 CabState from 2 to 0

0:04:35.234 I/ATC: Airport flow changed at EDMW!

CurFlow: AUTOGEN: West NewFlow: AUTOGEN: North

0:04:35.234 I/ATC: Changing EDMW CabState from 0 to 1

0:04:35.234 I/ATC: All departures are done at EDMW. Advancing...

0:04:35.234 I/ATC: Changing EDMW CabState from 1 to 2

0:04:35.234 I/ATC: All arrivals are done at EDMW. Advancing...

0:04:35.234 I/ATC: Changing EDMW CabState from 2 to 0

0:04:35.234 I/ATC: Airport flow changed at EDME!

CurFlow: AUTOGEN: West NewFlow: AUTOGEN: North

0:04:35.234 I/ATC: Changing EDME CabState from 0 to 1

0:04:35.234 I/ATC: All departures are done at EDME. Advancing...

0:04:35.234 I/ATC: Changing EDME CabState from 1 to 2

0:04:35.234 I/ATC: All arrivals are done at EDME. Advancing...

0:04:35.234 I/ATC: Changing EDME CabState from 2 to 0

0:04:35.234 I/ATC: Airport flow changed at ETSE!

CurFlow: AUTOGEN: West NewFlow: AUTOGEN: East

0:04:35.234 I/ATC: Changing ETSE CabState from 0 to 1

0:04:35.234 I/ATC: All departures are done at ETSE. Advancing...

0:04:35.234 I/ATC: Changing ETSE CabState from 1 to 2

0:04:35.234 I/ATC: All arrivals are done at ETSE. Advancing...

0:04:35.234 I/ATC: Changing ETSE CabState from 2 to 0

0:04:35.234 I/ATC: Airport flow changed at ETSF!

CurFlow: AUTOGEN: West NewFlow: AUTOGEN: East

0:04:35.234 I/ATC: Changing ETSF CabState from 0 to 1

0:04:35.234 I/ATC: All departures are done at ETSF. Advancing...

0:04:35.234 I/ATC: Changing ETSF CabState from 1 to 2

0:04:35.234 I/ATC: All arrivals are done at ETSF. Advancing...

0:04:35.234 I/ATC: Changing ETSF CabState from 2 to 0

0:04:35.234 I/ATC: Airport flow changed at EDMA!

CurFlow: AUTOGEN: West NewFlow: AUTOGEN: East

0:04:35.234 I/ATC: Changing EDMA CabState from 0 to 1

0:04:35.234 I/ATC: All departures are done at EDMA. Advancing...

0:04:35.234 I/ATC: Changing EDMA CabState from 1 to 2

0:04:35.234 I/ATC: All arrivals are done at EDMA. Advancing...

0:04:35.234 I/ATC: Changing EDMA CabState from 2 to 0

0:04:35.234 I/ATC: Airport flow changed at ED02!

CurFlow: AUTOGEN: West NewFlow: AUTOGEN: East

0:04:35.234 I/ATC: Changing ED02 CabState from 0 to 1

0:04:35.234 I/ATC: All departures are done at ED02. Advancing...

0:04:35.234 I/ATC: Changing ED02 CabState from 1 to 2

0:04:35.234 I/ATC: All arrivals are done at ED02. Advancing...

0:04:35.234 I/ATC: Changing ED02 CabState from 2 to 0

0:04:35.234 I/ATC: Airport flow changed at EDMJ!

CurFlow: AUTOGEN: West NewFlow: AUTOGEN: East

0:04:35.234 I/ATC: Changing EDMJ CabState from 0 to 1

0:04:35.234 I/ATC: All departures are done at EDMJ. Advancing...

0:04:35.234 I/ATC: Changing EDMJ CabState from 1 to 2

0:04:35.234 I/ATC: All arrivals are done at EDMJ. Advancing...

0:04:35.234 I/ATC: Changing EDMJ CabState from 2 to 0

0:04:35.234 I/ATC: Airport flow changed at ED08!

CurFlow: AUTOGEN: West NewFlow: AUTOGEN: North

0:04:35.234 I/ATC: Changing ED08 CabState from 0 to 1

0:04:35.234 I/ATC: All departures are done at ED08. Advancing...

0:04:35.234 I/ATC: Changing ED08 CabState from 1 to 2

0:04:35.234 I/ATC: All arrivals are done at ED08. Advancing...

0:04:35.234 I/ATC: Changing ED08 CabState from 2 to 0

0:04:35.234 I/ATC: Airport flow changed at EDMK!

CurFlow: AUTOGEN: West NewFlow: AUTOGEN: East

0:04:35.234 I/ATC: Changing EDMK CabState from 0 to 1

0:04:35.234 I/ATC: All departures are done at EDMK. Advancing...

0:04:35.234 I/ATC: Changing EDMK CabState from 1 to 2

0:04:35.234 I/ATC: All arrivals are done at EDMK. Advancing...

0:04:35.234 I/ATC: Changing EDMK CabState from 2 to 0

0:04:35.234 I/ATC: Airport flow changed at ETSL!

CurFlow: AUTOGEN: West NewFlow: AUTOGEN: East

0:04:35.234 I/ATC: Changing ETSL CabState from 0 to 1

0:04:35.234 I/ATC: All departures are done at ETSL. Advancing...

0:04:35.234 I/ATC: Changing ETSL CabState from 1 to 2

0:04:35.234 I/ATC: All arrivals are done at ETSL. Advancing...

0:04:35.234 I/ATC: Changing ETSL CabState from 2 to 0

0:04:35.234 I/ATC: Airport flow changed at EDJA!

CurFlow: AUTOGEN: West NewFlow: AUTOGEN: North

0:04:35.234 I/ATC: Changing EDJA CabState from 0 to 1

0:04:35.234 I/ATC: All departures are done at EDJA. Advancing...

0:04:35.234 I/ATC: Changing EDJA CabState from 1 to 2

0:04:35.234 I/ATC: All arrivals are done at EDJA. Advancing...

0:04:35.234 I/ATC: Changing EDJA CabState from 2 to 0

0:04:35.234 I/ATC: Airport flow changed at ETSA!

CurFlow: AUTOGEN: West NewFlow: AUTOGEN: East

0:04:35.234 I/ATC: Changing ETSA CabState from 0 to 1

0:04:35.234 I/ATC: All departures are done at ETSA. Advancing...

0:04:35.234 I/ATC: Changing ETSA CabState from 1 to 2

0:04:35.234 I/ATC: All arrivals are done at ETSA. Advancing...

0:04:35.234 I/ATC: Changing ETSA CabState from 2 to 0

0:04:35.234 I/ATC: Airport flow changed at ETSI!

CurFlow: AUTOGEN: West NewFlow: AUTOGEN: East

0:04:35.234 I/ATC: Changing ETSI CabState from 0 to 1

0:04:35.234 I/ATC: All departures are done at ETSI. Advancing...

0:04:35.234 I/ATC: Changing ETSI CabState from 1 to 2

0:04:35.234 I/ATC: All arrivals are done at ETSI. Advancing...

0:04:35.234 I/ATC: Changing ETSI CabState from 2 to 0

0:04:35.234 I/ATC: Airport flow changed at ETSN!

CurFlow: AUTOGEN: West NewFlow: AUTOGEN: East

0:04:35.234 I/ATC: Changing ETSN CabState from 0 to 1

0:04:35.234 I/ATC: All departures are done at ETSN. Advancing...

0:04:35.234 I/ATC: Changing ETSN CabState from 1 to 2

0:04:35.234 I/ATC: All arrivals are done at ETSN. Advancing...

0:04:35.234 I/ATC: Changing ETSN CabState from 2 to 0

0:04:35.234 I/ATC: Airport flow changed at EDMN!

CurFlow: AUTOGEN: West NewFlow: AUTOGEN: South

0:04:35.234 I/ATC: Changing EDMN CabState from 0 to 1

0:04:35.234 I/ATC: All departures are done at EDMN. Advancing...

0:04:35.234 I/ATC: Changing EDMN CabState from 1 to 2

0:04:35.234 I/ATC: All arrivals are done at EDMN. Advancing...

0:04:35.234 I/ATC: Changing EDMN CabState from 2 to 0

0:04:35.234 I/ATC: Airport flow changed at LOIR!

CurFlow: AUTOGEN: West NewFlow: AUTOGEN: North

0:04:35.234 I/ATC: Changing LOIR CabState from 0 to 1

0:04:35.234 I/ATC: All departures are done at LOIR. Advancing...

0:04:35.234 I/ATC: Changing LOIR CabState from 1 to 2

0:04:35.234 I/ATC: All arrivals are done at LOIR. Advancing...

0:04:35.234 I/ATC: Changing LOIR CabState from 2 to 0

0:04:35.234 I/ATC: Airport flow changed at EDMO!

CurFlow: AUTOGEN: West NewFlow: AUTOGEN: East

0:04:35.234 I/ATC: Changing EDMO CabState from 0 to 1

0:04:35.234 I/ATC: All departures are done at EDMO. Advancing...

0:04:35.234 I/ATC: Changing EDMO CabState from 1 to 2

0:04:35.234 I/ATC: All arrivals are done at EDMO. Advancing...

0:04:35.234 I/ATC: Changing EDMO CabState from 2 to 0

0:04:35.234 I/ATC: Airport flow changed at ETHR!

CurFlow: AUTOGEN: West NewFlow: AUTOGEN: East

0:04:35.234 I/ATC: Changing ETHR CabState from 0 to 1

0:04:35.234 I/ATC: All departures are done at ETHR. Advancing...

0:04:35.234 I/ATC: Changing ETHR CabState from 1 to 2

0:04:35.234 I/ATC: All arrivals are done at ETHR. Advancing...

0:04:35.234 I/ATC: Changing ETHR CabState from 2 to 0

0:04:35.234 I/ATC: Airport flow changed at LOWS!

CurFlow: AUTOGEN: West NewFlow: AUTOGEN: North

0:04:35.234 I/ATC: Changing LOWS CabState from 0 to 1

0:04:35.234 I/ATC: All departures are done at LOWS. Advancing...

0:04:35.234 I/ATC: Changing LOWS CabState from 1 to 2

0:04:35.234 I/ATC: All arrivals are done at LOWS. Advancing...

0:04:35.234 I/ATC: Changing LOWS CabState from 2 to 0

0:04:35.234 I/ATC: Airport flow changed at EDMS!

CurFlow: AUTOGEN: West NewFlow: AUTOGEN: East

0:04:35.234 I/ATC: Changing EDMS CabState from 0 to 1

0:04:35.234 I/ATC: All departures are done at EDMS. Advancing...

0:04:35.234 I/ATC: Changing EDMS CabState from 1 to 2

0:04:35.234 I/ATC: All arrivals are done at EDMS. Advancing...

0:04:35.234 I/ATC: Changing EDMS CabState from 2 to 0

0:04:35.234 I/ATC: Airport flow changed at LOIJ!

CurFlow: AUTOGEN: West NewFlow: AUTOGEN: East

0:04:35.234 I/ATC: Changing LOIJ CabState from 0 to 1

0:04:35.234 I/ATC: All departures are done at LOIJ. Advancing...

0:04:35.234 I/ATC: Changing LOIJ CabState from 1 to 2

0:04:35.234 I/ATC: All arrivals are done at LOIJ. Advancing...

0:04:35.234 I/ATC: Changing LOIJ CabState from 2 to 0

0:04:35.234 I/ATC: Airport flow changed at ED05!

CurFlow: AUTOGEN: West NewFlow: AUTOGEN: North

0:04:35.234 I/ATC: Changing ED05 CabState from 0 to 1

0:04:35.234 I/ATC: All departures are done at ED05. Advancing...

0:04:35.234 I/ATC: Changing ED05 CabState from 1 to 2

0:04:35.234 I/ATC: All arrivals are done at ED05. Advancing...

0:04:35.234 I/ATC: Changing ED05 CabState from 2 to 0

0:04:35.234 I/ATC: Airport flow changed at EDMV!

CurFlow: AUTOGEN: West NewFlow: AUTOGEN: North

0:04:35.234 I/ATC: Changing EDMV CabState from 0 to 1

0:04:35.234 I/ATC: All departures are done at EDMV. Advancing...

0:04:35.234 I/ATC: Changing EDMV CabState from 1 to 2

0:04:35.234 I/ATC: All arrivals are done at EDMV. Advancing...

0:04:35.234 I/ATC: Changing EDMV CabState from 2 to 0

0:04:35.234 I/ATC: Airport flow changed at EDDM!

CurFlow: AUTOGEN: West NewFlow: AUTOGEN: East

0:04:35.234 I/ATC: Changing EDDM CabState from 0 to 1

0:04:35.234 I/ATC: All departures are done at EDDM. Advancing...

0:04:35.234 I/ATC: Changing EDDM CabState from 1 to 2

0:04:35.234 I/ATC: All arrivals are done at EDDM. Advancing...

0:04:35.234 I/ATC: Changing EDDM CabState from 2 to 0

0:07:51.282 I/ATC: Airport flow changed at LEMD!

CurFlow: AUTOGEN: South NewFlow: AUTOGEN: North

0:07:51.282 I/ATC: Changing LEMD CabState from 0 to 1

0:07:51.282 I/ATC: All departures are done at LEMD. Advancing...

0:07:51.282 I/ATC: Changing LEMD CabState from 1 to 2

0:07:51.282 I/ATC: All arrivals are done at LEMD. Advancing...

0:07:51.282 I/ATC: Changing LEMD CabState from 2 to 0

0:11:44.834 I/ATC: Airport flow changed at LEMD!

CurFlow: AUTOGEN: North NewFlow: AUTOGEN: South

0:11:44.834 I/ATC: Changing LEMD CabState from 0 to 1

0:11:44.834 I/ATC: All departures are done at LEMD. Advancing...

0:11:44.834 I/ATC: Changing LEMD CabState from 1 to 2

0:11:44.834 I/ATC: All arrivals are done at LEMD. Advancing...

0:11:44.834 I/ATC: Changing LEMD CabState from 2 to 0

X-IvAp: Disconnected

X-IvAp: Your ICAO:

X-IvAp: Your Tailnumber:

X-IvAp: Disconnected

X-IvAp: Your ICAO:

X-IvAp: Your Tailnumber:

0:16:11.281 I/JOY: UNREGISTER Joystick device: Logitech Attack 3 - VID:1133PID:49684

0:16:11.281 D/HID: HID Bridge Shutdown

August 20, 2012

ну так тут scs вообще не грузится...

August 20, 2012

Да, пардон, я же выкинул из плагинов папку scs, чтоб не вылетало... Вот:

log.txt for X-Plane 10.10 Beta 8 X-Plane 101008 compiled on Aug 11 2012 13:17:50

This log file is generated automatically by Laminar Research applications and contains diagnostics about your graphics hardware, installation, and any error conditions.

If you need to contact tech support or file a bug, please send us this file. NOTE: this file is rewritten every time you start ANY of your X-System applications.

If you got a hard system crash and want to report this to Laminar Research, then be sure to send your crash_report.txt file generated by the crash as well!

Windows 5.1 (build 2600/2) Service Pack 2

(This is really Windows Vista, Windows Server 2008 or newer.)

This is a 64-bit version of Windows.

CPU type: 586

Physical Memory (total for computer): 4206702592

Maximum Virtual Memory (for X-Plane only): 4294836224

CPU 0: Intel® Core™ i7-2640M CPU @ 2.80GHz Speed (mhz): 2793

X-System folder:'C:\X-Plane 10/', case sensitive=0

WGL_ARB_extensions_string WGL_ARB_pixel_format WGL_ATI_pixel_format_float WGL_ARB_pixel_format_float WGL_ARB_multisample WGL_EXT_swap_control WGL_EXT_swap_control_tear WGL_ARB_pbuffer WGL_ARB_render_texture WGL_ARB_make_current_read WGL_EXT_extensions_string WGL_ARB_buffer_region WGL_EXT_framebuffer_sRGB WGL_ATI_render_texture_rectangle WGL_EXT_pixel_format_packed_float WGL_I3D_genlock WGL_NV_swap_group WGL_ARB_create_context WGL_AMD_gpu_association WGL_AMDX_gpu_association WGL_ARB_create_context_profile WGL_NV_float_buffer

WGL_COLOR_BITS_ARB 32.000000

WGL_RED_BITS_ARB 8.000000

WGL_GREEN_BITS_ARB 8.000000

WGL_BLUE_BITS_ARB 8.000000

WGL_ALPHA_BITS_ARB 8.000000

WGL_DEPTH_BITS_ARB 24.000000

WGL_STENCIL_BITS_ARB 8.000000

WGL_SAMPLE_BUFFERS_ARB 0.000000

WGL_SAMPLES_ARB 0.000000

WGL_SWAP_METHOD_ARB 8234.000000

WGL_FRAMEBUFFER_SRGB_CAPABLE_ARB 1.000000

OpenGL Vendor : ATI Technologies Inc.

OpenGL Render : AMD Radeon 6600M and 6700M Series

OpenGL Version : 4.2.11740 Compatibility Profile Context (420)

OpenGL Extensions: GL_AMDX_debug_output GL_AMDX_vertex_shader_tessellator GL_AMD_conservative_depth GL_AMD_debug_output GL_AMD_depth_clamp_separate GL_AMD_draw_buffers_blend GL_AMD_multi_draw_indirect GL_AMD_name_gen_delete GL_AMD_performance_monitor GL_AMD_pinned_memory GL_AMD_query_buffer_object GL_AMD_sample_positions GL_AMD_seamless_cubemap_per_texture GL_AMD_shader_stencil_export GL_AMD_shader_trace GL_AMD_texture_cube_map_array GL_AMD_texture_texture4 GL_AMD_transform_feedback3_lines_triangles GL_AMD_vertex_shader_layer GL_AMD_vertex_shader_tessellator GL_AMD_vertex_shader_viewport_index GL_ARB_ES2_compatibility GL_ARB_base_instance GL_ARB_blend_func_extended GL_ARB_color_buffer_float GL_ARB_compressed_texture_pixel_storage GL_ARB_conservative_depth GL_ARB_copy_buffer GL_ARB_depth_buffer_float GL_ARB_depth_clamp GL_ARB_depth_texture GL_ARB_draw_buffers GL_ARB_draw_buffers_blend GL_ARB_draw_elements_base_vertex GL_ARB_draw_indirect GL_ARB_draw_instanced GL_ARB_explicit_attrib_location GL_ARB_fragment_coord_conventions GL_ARB_fragment_program GL_ARB_fragment_program_shadow GL_ARB_fragment_shader GL_ARB_framebuffer_object GL_ARB_framebuffer_sRGB GL_ARB_geometry_shader4 GL_ARB_get_program_binary GL_ARB_gpu_shader5 GL_ARB_gpu_shader_fp64 GL_ARB_half_float_pixel GL_ARB_half_float_vertex GL_ARB_imaging GL_ARB_instanced_arrays GL_ARB_internalformat_query GL_ARB_map_buffer_alignment GL_ARB_map_buffer_range GL_ARB_multisample GL_ARB_multitexture GL_ARB_occlusion_query GL_ARB_occlusion_query2 GL_ARB_pixel_buffer_object GL_ARB_point_parameters GL_ARB_point_sprite GL_ARB_provoking_vertex GL_ARB_sample_shading GL_ARB_sampler_objects GL_ARB_seamless_cube_map GL_ARB_separate_shader_objects GL_ARB_shader_atomic_counters GL_ARB_shader_bit_encoding GL_ARB_shader_image_load_store GL_ARB_shader_objects GL_ARB_shader_precision GL_ARB_shader_stencil_export GL_ARB_shader_subroutine GL_ARB_shader_texture_lod GL_ARB_shading_language_100 GL_ARB_shading_language_420pack GL_ARB_shading_language_packing GL_ARB_shadow GL_ARB_shadow_ambient GL_ARB_sync GL_ARB_tessellation_shader GL_ARB_texture_border_clamp GL_ARB_texture_buffer_object GL_ARB_texture_buffer_object_rgb32 GL_ARB_texture_compression GL_ARB_texture_compression_bptc GL_ARB_texture_compression_rgtc GL_ARB_texture_cube_map GL_ARB_texture_cube_map_array GL_ARB_texture_env_add GL_ARB_texture_env_combine GL_ARB_texture_env_crossbar GL_ARB_texture_env_dot3 GL_ARB_texture_float GL_ARB_texture_gather GL_ARB_texture_mirrored_repeat GL_ARB_texture_multisample GL_ARB_texture_non_power_of_two GL_ARB_texture_query_lod GL_ARB_texture_rectangle GL_ARB_texture_rg GL_ARB_texture_rgb10_a2ui GL_ARB_texture_snorm GL_ARB_texture_storage GL_ARB_timer_query GL_ARB_transform_feedback2 GL_ARB_transform_feedback3 GL_ARB_transform_feedback_instanced GL_ARB_transpose_matrix GL_ARB_uniform_buffer_object GL_ARB_vertex_array_bgra GL_ARB_vertex_array_object GL_ARB_vertex_attrib_64bit GL_ARB_vertex_buffer_object GL_ARB_vertex_program GL_ARB_vertex_shader GL_ARB_vertex_type_2_10_10_10_rev GL_ARB_viewport_array GL_ARB_window_pos GL_ATI_draw_buffers GL_ATI_envmap_bumpmap GL_ATI_fragment_shader GL_ATI_meminfo GL_ATI_separate_stencil GL_ATI_texture_compression_3dc GL_ATI_texture_env_combine3 GL_ATI_texture_float GL_ATI_texture_mirror_once GL_EXT_abgr GL_EXT_bgra GL_EXT_bindable_uniform GL_EXT_blend_color GL_EXT_blend_equation_separate GL_EXT_blend_func_separate GL_EXT_blend_minmax GL_EXT_blend_subtract GL_EXT_compiled_vertex_array GL_EXT_copy_buffer GL_EXT_copy_texture GL_EXT_direct_state_access GL_EXT_draw_buffers2 GL_EXT_draw_instanced GL_EXT_draw_range_elements GL_EXT_fog_coord GL_EXT_framebuffer_blit GL_EXT_framebuffer_multisample GL_EXT_framebuffer_object GL_EXT_framebuffer_sRGB GL_EXT_geometry_shader4 GL_EXT_gpu_program_parameters GL_EXT_gpu_shader4 GL_EXT_histogram GL_EXT_multi_draw_arrays GL_EXT_packed_depth_stencil GL_EXT_packed_float GL_EXT_packed_pixels GL_EXT_pixel_buffer_object GL_EXT_point_parameters GL_EXT_provoking_vertex GL_EXT_rescale_normal GL_EXT_secondary_color GL_EXT_separate_specular_color GL_EXT_shader_image_load_store GL_EXT_shadow_funcs GL_EXT_stencil_wrap GL_EXT_subtexture GL_EXT_texgen_reflection GL_EXT_texture3D GL_EXT_texture_array GL_EXT_texture_buffer_object GL_EXT_texture_compression_bptc GL_EXT_texture_compression_latc GL_EXT_texture_compression_rgtc GL_EXT_texture_compression_s3tc GL_EXT_texture_cube_map GL_EXT_texture_edge_clamp GL_EXT_texture_env_add GL_EXT_texture_env_combine GL_EXT_texture_env_dot3 GL_EXT_texture_filter_anisotropic GL_EXT_texture_integer GL_EXT_texture_lod GL_EXT_texture_lod_bias GL_EXT_texture_mirror_clamp GL_EXT_texture_object GL_EXT_texture_rectangle GL_EXT_texture_sRGB GL_EXT_texture_sRGB_decode GL_EXT_texture_shared_exponent GL_EXT_texture_snorm GL_EXT_texture_storage GL_EXT_texture_swizzle GL_EXT_timer_query GL_EXT_transform_feedback GL_EXT_vertex_array GL_EXT_vertex_array_bgra GL_EXT_vertex_attrib_64bit GL_IBM_texture_mirrored_repeat GL_KTX_buffer_region GL_NV_blend_square GL_NV_conditional_render GL_NV_copy_depth_to_color GL_NV_copy_image GL_NV_explicit_multisample GL_NV_float_buffer GL_NV_half_float GL_NV_primitive_restart GL_NV_texgen_reflection GL_NV_texture_barrier GL_SGIS_generate_mipmap GL_SGIS_texture_edge_clamp GL_SGIS_texture_lod GL_SUN_multi_draw_arrays GL_WIN_swap_hint WGL_EXT_swap_control

threaded_avail : 1 tex_clamp_avail : 1 add_env_avail : 1

combine_avail : 1 dis_fog_avail : 0 instance_avail : 1

two-sided stencil: 0 separate stencil : 1 tex_comp_avail : 1

vbo_avail : 1 pbo_avail : 1 automini_avail : 1

aniso_avail : 1 fsaa_avail : 1 occlude_avail : 1

sprites_avail : 1

sblend_avail : 1/1

vprog_avail : 1 (2147483647)

fprog_avail : 1 (2147483647/2147483647/2147483647/2147483647)

depth_tex_avail : 1

shad_objs_avail : 1

vshader_avail : 1 (29/16384/128/32/16/16384)

fshader_avail : 1 (16384)

glsl_avail : 1 (4.20/100)

first-gen shaders: 0

gshader_avail : 1 buniform_avail : 1 shad_lod_avail : 1

gpu_shad4_avail : 1 framebuf_avail : 1 frameblit_avail : 1

drawbuf_avail : 1 drawbuf2_avail : 1 tex_float_avail : 1

non_pots_avail : 1 packed_stencil : 1 texture_rg : 1

framebuffer_srgb : 1 copy_buf_avail : 1 pinned_avail : 1 sync/fence : 1

max tex units : 8 (16/16)

max iso filtering: 16.000000

max texture size : 16384 (hardware limit)

max point size : 63.000000

idx in vram : 1

This video card is: DX10 or 11 - With instancing (found glMapBufferRange)

CPU count : 4

Fetching plugins for C:\X-Plane 10/Resources/plugins

Loaded: C:\X-Plane 10/Resources/plugins/PluginAdmin/win.xpl.

CustomSBDatarefs004 - parsing setup file

CustomSBDatarefs004 - parsing successful

Loaded: C:\X-Plane 10/Resources/plugins/CustomSBDatarefs004Win.xpl.

My resources directory is: C:\X-Plane 10\Resources\plugins\X-IvAp Resources\

My AirlinesDB is: C:\X-Plane 10\Resources\plugins\X-IvAp Resources\airlines.dat

My liveries is: C:\X-Plane 10\Resources\plugins\X-IvAp Resources\liveries.txt

X-IvAp: Teamspeak: trying to load sdk from C:\X-Plane 10\Resources\plugins\X-IvAp Resources\TSRemote.dll

X-IvAp: Teamspeak: sdk found and linked

X-IvAp: X-IvAp 0.2.0 for Windows (Rev. 402) ready

X-IvAp: Your ICAO:

X-IvAp: Your Tailnumber:

Loaded: C:\X-Plane 10/Resources/plugins/x-ivap_win.xpl.

Loaded: C:\X-Plane 10/Resources/plugins/scs/win.xpl.