Сразу две модели Airbus A300-600 и Airbus A300-600ST Beluga доступны для X-Plane 12 через iniManager.
Кстати, сейчас их можно купить всего лишь за £9.99 :
Aibus A300-600
Airbus A300-600ST
Списки обновлений:
A300-600 v2.1.0
Flight model:
— Adjusted aerofoils to better reflect supercritical aerofoils MCRIT. Fuse body area rule adjusted on A300 F and PAX to reduce drag and better reflect performance;
— Weight and balance system changed to new XP12 payload system. This allows for better CG in A300 PAX and F along with payloads that now dynamically adjust vertically for the Beluga ST;
— Adjust engine performance to better reflect thrust output during climb and CRZ phase in XP12;
— Adjust drag profile of A300 PAX and F to better reflect flag drag;
— Adjusted Beluga ST fuel burn profile using XP12s more fine FF adjustments;
— Adjusted empty weight CG position for A300F PAX and Beluga.
Systems:
— Change flap system to work in XP12 for A300 and Beluga;
— Custom fuel flow adjusted to work in XP12 for the A300 and Beluga;
— Change EFB CG slider to work with XP 12 weight and balance;
— Adjusted start times to work with XP12 engine model;
— Updated Airac reading to work with XP12.
Art/lights:
— Updated A300 and Beluga to use XP12 lights in both the flight deck and exterior;
— Adjusted elements of flight deck to work better in XP12s lighting environment.
A300-600ST v1.1.3:
Flight model:
— Adjusted aerofoils to better reflect supercritical aerofoils MCRIT. Fuse body area rule adjusted on A300 F and PAX to reduce drag and better reflect performance;
— Weight and balance system changed to new XP12 payload system. This allows for better CG in A300 PAX and F along with payloads that now dynamically adjust vertically for the Beluga ST;
— Adjust engine performance to better reflect thrust output during climb and CRZ phase in XP12;
— Adjust drag profile of A300 PAX and F to better reflect flag drag;
— Adjusted Beluga ST fuel burn profile using XP12s more fine FF adjustments;
— Adjusted empty weight CG position for A300F PAX and Beluga;
Systems:
— Change flap system to work in XP12 for A300 and Beluga;
— Custom fuel flow adjusted to work in XP12 for the A300 and Beluga;
— Change EFB CG slider to work with XP 12 weight and balance;
— Adjusted start times to work with XP12 engine model;
— Updated Airac reading to work with XP12.
Art/lights:
— Updated A300 and Beluga to use XP12 lights in both the flight deck and exterior
— Adjusted elements of flight deck to work better in XP12s lighting environment.
Больше не ысародиП
Так, для владельцев обновление бесплатное, или как ?
Да. Бесплатное.
Ну, хоть кто то остался людьми…
Обновились модели самолетов A300-600 (до версии 2.1.1), А310, и A300-600ST Beluga (до версии 1.1.4) от iniBuilds для X-Plane 11/12.
Список изменений:
Art:
— Fixed – Nose Landing Gear lights not working;
— Fixed — Strobes too bright;
— Fixed — FO side rotaries and digital displays offset;
— Fixed — Beluga ST has all ANN lights on all the time even with switch set to BRT and DIM;
— Fixed — Beluga flight deck is green at night.
Systems:
— Fixed — Freeze computing TO Perf;
— Fixed — WX Radar not working;
— Fixed — STBY Altimeter Scale wrong when altitude high;
— Updated – AIRAC cycle;
— Fixed — SASL frame rates issue;
-Fixed — Trim is moving but not affecting flight model;
— Fixed — Fuel flow not showing and no fuel is burnt by the engines;
— Fixed — ATHR in the CRZ N1 would hunt;
— Fixed — Removed experimental flight model message;
— Fixed — FLAPS and trim not working due to changes in core sim variables;
— Fixed — A300 and Beluga weather request do not work anymore.
Flight Model
— Fixed — Adjusted Beluga ST gear placement;
— Fixed — Changed CG slider on EFB to match in sim XP12 CG variable;
— Fixed — Adjusted GE/PW engines to work correctly with engine model changes in XP12. This will give realistic start times for both the GE/PW and in-flight engine windmilling/restart behaviour. Max motor adjusted for both GE/PW to better reflect max motor N2 values.
Sound
— Fixed — Erroneous sound spaces in beluga and a300.
Список изменений для X-Plane 11:
— Fixed AIRAC bug.
Для обновления необходимо использовать iniManager, и если обновления там нет, то проверьте актуальность версии самого Manager.
На официальном сайте скидка 25% на приобретение моделей, акция продлиться одну неделю.
iniBuilds обновили модели самолетов Airbus A300-600 и A300-600ST Beluga до версий 2.1.4 и 1.1.6 соответственно.
Список изменений A300-600:
— Minor bug fixes;
— Fixed impact on systems/aircraft due to EFB TO perf;
— Fixed aircraft logs filling out excessively.
Список изменений A300-600ST:
— Minor bug fixes;
— Auto throttle functionality restored.
Обновиться можно через iniManager.
Добрый день. Подскажите, где сейчас можно приобрести этот самолёт? Его больше в продаже нет. И какие ещё нужны библиотеки, чтоб он работал в 12 ХP? У моего друга он не работает Сим просто не запускается с этим самолётом. С остальными всё работает. Может реально чего-то не хватает. Только из-за этого самолёта хочу ХР 12 попробовать. Но боюсь, что не запустится.