Ура ура ура у меня получилось купить 767 от Level-D но теперь у меня друга проблема деньги списаны самолёт установлен думалвсё а не тут то было когда его выбираю выдаёт ошибку пишет поробуйте его переустановить пробую ничего не получаеться всеровно ошибка что делать может ли это быть из за того что у меня SP3.
поставте FSUIPC для FSX
Для начала поставь FSUIPC
Peter Dowson FSUIPC 4
http://www.schiratti.com/dowson.html
Если не помогает — убедись, что установлен SimConnect (идет в пакете c SDK)
Должен работать.
Порылся в папках — нашел.
Я просто бросил SimConnect (LVLD.dll) в папку Modules (корневая папка MS Flight simulator), но это уже после установки FSUIPC.
Посмотри есть у тебя такой файл в этой папке? Сам файл выложил на сайте в разделе файлы (19769-LVLD-DLL-SimConnect)
Если он не появится в разделе файлы, скинь мне свой e-mail, пришлю.
Сообщение отредактировал sergf229 — 10.04.2009 11:04
Если вопрос к автору — он купил его на Flight1, как и все остальные. Он уже несколько дней взывает о помощи. Сначала купить не удавалось, теперь установить.
Известно где он только в одном месте продаёться 1флайт.
Сейчас сделаю…
Сейчас сделаю… Ошибка вот какая Окошечко маленькое появляеться в нижне углу а там надпись Panel Initializations Failure. Reinstall Level-D Simulations B767-300.
Сейчас сделаю… Ошибка вот какая Окошечко маленькое появляеться в нижне углу а там надпись Panel Initializations Failure. Reinstall Level-D Simulations B767-300.
А менеджер конфигурации запускали?
Сейчас сделаю… Ошибка вот какая Окошечко маленькое появляеться в нижне углу а там надпись Panel Initializations Failure. Reinstall Level-D Simulations B767-300.
А менеджер конфигурации запускали?
Да а что зачит его загрузить, а как бы загружаю его груз и паксы, а потом нажимаю сохранить это и значит загрузить? или я что то не так делаю.
Это все проги пропадут что-ли и самолёты другие.
Это все проги пропадут что-ли и самолёты другие.
Попробуй для начала снести ФСУПИК (если он установлен), потом через меню установки-удаления программ полностью снеси левел-д, потом поищи и сотри в реестре упоминания о левел-д, и из fsx.cfg тоже снеси упоминание об этом продукте. Потом рестарт компу и переустановка левелд заново. Лично я делал все действия, и мне это помогло. Что конкретно, я не стал разбираться
Сообщение отредактировал ntradis — 8.04.2009 20:07
Вот с сайта Левела, я не помню, что точно у меня было с этим. Но мне помогли разборки с симконнектом. По моему я его просто установил и все.
Кстати, а патч 767-SP2a установлен?
READ ME FIRST
FSX & 767 BACKGROUNDER: http://www.leveldsim.com/forums/forum_posts.asp?TID=18727
IMPORTANT There are 3 options to the fix the error. FSUIPC, UNINSTALL/REINSTALL and SIMCONNECT. Please read this entire post before trying any of them. DLL.XML Some users have fixed the issue by editing the DLL.XML file: http://www.leveldsim.com/forums/forum_posts.asp?TID=17005
1. FSUIPC FIX Before commencing with the next step, try downloading and reinstalling FSUIPC4 from http://www.schiratti.com/dowson.html
2. UNINSTALL/REINSTALL
UNINSTALL the 767 and all 767 service packs from the Control Panel. Ensure that SHOW UPDATES is enabled.
Clean the registry of the keywords «Level-D Simulations» START> RUN> type «regedit» (without the quotes). Use the search function within the Registry Editor with the keywords «Level-D Simulations» and delete the strings with «Level-D Simulations».
Clean the FSX.CFG of any 767 values in the trusted section. The FSX.CFG file is found at C:Documents and SettingsINSERT YOUR USERNAME HEREApplication DataMicrosoftFSX
Open FSX and make sure you really do have the SP2 installed… FSX-SP2.20071210-2023 (About FSX). If you DON’T have the SP2 (or Acceleration), install it. If you have chosen to STAY with FSX-SP1, you will not be able to install the 767 SP2a.
Download the FSX-SP2 here: http://www.fsinsider.com/downloads/Pages/F…rvicePack2.aspx
If you are sticking with the FSX-SP1, a new update has been made for the 767-SP2a and the FSX-SP1… see here: http://www.leveldsim.com/forums/forum_posts.asp?TID=17319
Reboot your computer.
Run FSX. Ensure it’s cool (no errors).
IMPORTANT Turn OFF your Anti-Virus and Firewall prior to the next step:
DOWNLOAD & INSTALL the full 767 with SP2a: http://net1.100megabyte.com/LVLD-763-FSX-With-SP2a.exe
See the FAQ here for DLL.XML fix: http://www.leveldsim.com/forums/forum_post…=16993&PN=1
3. SIMCONNECT FIX
If you still get the panel error initialization error after trying the FSUIPC fix and the uninstall/reinstall fix, the Simconnect installation may be corrupted. This seems to happen when SP2 has been removed and re-installed.
To solve this:
* Control Panel —> Add/Remove programs.
* Ensure «Show All updates» (XP) or «View Installed Updates» (VISTA) is enabled.
* Find and select «Microsoft Flight Simulator X SP2».
* Click «Remove» and confirm uninstallation of FSX-SP2.
You might not be able to find the «Microsoft Flight Simulator X» entry in the Add/remove list. If this is the case…
* Close the Add/Remove program window and open it again.
* Find and select «Microsoft Flight Simulator X SP1».
* Click «Remove» and confirm that uninstallation of SP1 (might require FSX Disk 1).
Go to this folder:
C:WINDOWSWinSxS
Delete these entries 3:
x86_Microsoft.FlightSimulator.SimConnect_67c7c14424d61b5b_10.0.60905.0_….
x86_Microsoft.FlightSimulator.SimConnect_67c7c14424d61b5b_10.0.61242.0_…..
x86_Microsoft.FlightSimulator.SimConnect_67c7c14424d61b5b_10.0.61259.0_….
*
Insert Your «Microsoft Flight Simulator X» Disk 1.
*
Run Setup from the root folder on the CD.
*
Select «Repair» and ok. It can take a longtime to finish and progrees might seem as if it has haltet. Just wait until it finishes.
*
Install SP1.
*
Install SP2.
Simconnect has now been restored.
* Install 767.
Сообщение отредактировал sergf229 — 9.04.2009 09:36
The Level-D 767 is configured for FSX Service Pack 2. If for some reason you do not have FSX Service Pack 2 installed, there is an alternate module that will allow this product to work with FSX Service Pack 1. In the download below, you will see an alternate LVLD.DLL file that will allow this product to work if you only have FSX Service Pack 1. The best thing to do is rename the current LVLD.DLL to something like LVLD.BAK, and then you can extract the SP1 compatible DLL from the zip file making sure it is in your Modules folder
в папке Modules посмотрите есть ли архив LVLD.zip ….
думаю могу помочь если речь идет о FSX
Конечно о нём родном FSX помогите плиз.
Вот с сайта Левела, я не помню, что точно у меня было с этим. Но мне помогли разборки с симконнектом. По моему я его просто установил и все.
Кстати, а патч 767-SP2a установлен?
READ ME FIRST
FSX & 767 BACKGROUNDER: http://www.leveldsim.com/forums/forum_posts.asp?TID=18727
IMPORTANT There are 3 options to the fix the error. FSUIPC, UNINSTALL/REINSTALL and SIMCONNECT. Please read this entire post before trying any of them. DLL.XML Some users have fixed the issue by editing the DLL.XML file: http://www.leveldsim.com/forums/forum_posts.asp?TID=17005
1. FSUIPC FIX Before commencing with the next step, try downloading and reinstalling FSUIPC4 from http://www.schiratti.com/dowson.html
2. UNINSTALL/REINSTALL
UNINSTALL the 767 and all 767 service packs from the Control Panel. Ensure that SHOW UPDATES is enabled.
Clean the registry of the keywords «Level-D Simulations» START> RUN> type «regedit» (without the quotes). Use the search function within the Registry Editor with the keywords «Level-D Simulations» and delete the strings with «Level-D Simulations».
Clean the FSX.CFG of any 767 values in the trusted section. The FSX.CFG file is found at C:Documents and SettingsINSERT YOUR USERNAME HEREApplication DataMicrosoftFSX
Open FSX and make sure you really do have the SP2 installed… FSX-SP2.20071210-2023 (About FSX). If you DON’T have the SP2 (or Acceleration), install it. If you have chosen to STAY with FSX-SP1, you will not be able to install the 767 SP2a.
Download the FSX-SP2 here: http://www.fsinsider.com/downloads/Pages/F…rvicePack2.aspx
If you are sticking with the FSX-SP1, a new update has been made for the 767-SP2a and the FSX-SP1… see here: http://www.leveldsim.com/forums/forum_posts.asp?TID=17319
Reboot your computer.
Run FSX. Ensure it’s cool (no errors).
IMPORTANT Turn OFF your Anti-Virus and Firewall prior to the next step:
DOWNLOAD & INSTALL the full 767 with SP2a: http://net1.100megabyte.com/LVLD-763-FSX-With-SP2a.exe
See the FAQ here for DLL.XML fix: http://www.leveldsim.com/forums/forum_post…=16993&PN=1
3. SIMCONNECT FIX
If you still get the panel error initialization error after trying the FSUIPC fix and the uninstall/reinstall fix, the Simconnect installation may be corrupted. This seems to happen when SP2 has been removed and re-installed.
To solve this:
* Control Panel —> Add/Remove programs.
* Ensure «Show All updates» (XP) or «View Installed Updates» (VISTA) is enabled.
* Find and select «Microsoft Flight Simulator X SP2».
* Click «Remove» and confirm uninstallation of FSX-SP2.
You might not be able to find the «Microsoft Flight Simulator X» entry in the Add/remove list. If this is the case…
* Close the Add/Remove program window and open it again.
* Find and select «Microsoft Flight Simulator X SP1».
* Click «Remove» and confirm that uninstallation of SP1 (might require FSX Disk 1).
Go to this folder:
C:WINDOWSWinSxS
Delete these entries 3:
x86_Microsoft.FlightSimulator.SimConnect_67c7c14424d61b5b_10.0.60905.0_….
x86_Microsoft.FlightSimulator.SimConnect_67c7c14424d61b5b_10.0.61242.0_…..
x86_Microsoft.FlightSimulator.SimConnect_67c7c14424d61b5b_10.0.61259.0_….
*
Insert Your «Microsoft Flight Simulator X» Disk 1.
*
Run Setup from the root folder on the CD.
*
Select «Repair» and ok. It can take a longtime to finish and progrees might seem as if it has haltet. Just wait until it finishes.
*
Install SP1.
*
Install SP2.
Simconnect has now been restored.
* Install 767.
Да через переводчик перевёл, но та такой перевод сами понимаете можно поподробней я что то непонял что мне надо сделать установить фскуп 4 или что с длл?
The Level-D 767 is configured for FSX Service Pack 2. If for some reason you do not have FSX Service Pack 2 installed, there is an alternate module that will allow this product to work with FSX Service Pack 1. In the download below, you will see an alternate LVLD.DLL file that will allow this product to work if you only have FSX Service Pack 1. The best thing to do is rename the current LVLD.DLL to something like LVLD.BAK, and then you can extract the SP1 compatible DLL from the zip file making sure it is in your Modules folder
в папке Modules посмотрите есть ли архив LVLD.zip ….
Вот это он LVLD.DLL_for_ SimConnect_1 если он то есть.
поставте FSUIPC для FSX