
Thank you for downloading FsQC.


look at www.FsQC.eu for the manual and more information.


Unzip the file in any folder of your choise.(except windows folder)




**********************************************************************
**********************************************************************


INSTALLATION:

RUN Install-RunWays as Administrator
And Follow the Instructions

If the window: "Windows protected your PC" is popping up click on "more info" and click on "run anyway". 
FsQC is not signed by Microsoft and therefore the Publisher is Unknown.
If you have any doubts or questions about this please send a Mail to: support@fscs.eu

The installer downloads the latest FsQC version
The installer is checking for the necessary files 
The installer installs also FSUIPC and MakeRwys when the necessary files not be found
You can do this also manually see MakeRunways

If the Installer doesn't work: extract the FsQuickChange.zip file and run the file: 'FsQuickChange'.
If the runways files not be found, you must do it manually see MakeRunways 

Some virus scanners can give a false positive, you can check it yourself online:

  https://vms.drweb.com/scan_file/
  https://www.virscan.org/

or search for other viruscheck websites.



WideFs users:

 Install first on the machine where FS is running
 Copy the entire folder to the remote computer, or install again on the remote computer



Please set also your System Text to 100%


**********************************************************************
**********************************************************************

FsQC always needs a flightplan!!!!!


**********************************************************************
**********************************************************************

MAKERUNWAYS,

you can download MakeRunways FREE from the internet on: www.schiratti.com/dowson.html.
After downloading extract the MakeRwys.zip file in the folder where fsx.exe or fs9.exe or P3D is present.
Run MakeRwys.exe, after that you will find there 2 files: 'runways.xml' and 'f4.csv' copy the files to your FsQC folder.
Without these two files the program can't work properly!!!!


***********************************************************************
***********************************************************************
******                                                                                           
****** Check before start taxiing everything in the Flight Info is 
****** filled in, when not (except aircraft info) you must make the 
****** flight plan also in the FsQC Flightplanner.  
******                                                                                           
***********************************************************************
***********************************************************************


When FsQC not start or is automatically closing or hanging, then it's maybe blocked by the firewall/virusscanner, you must then give FsQC access and/or disable scanner.
Or turn off virusscanner, start FsQC, when loading is finished turn on virusscanner.


************************************************************************
******                                                           *******
******  Sometimes it's necessary to start FsQC as administrator. *******
******                                                           *******
************************************************************************



****************************************
**                                    **
** Troubleshoot: www.fsqc.eu/faq.html **
**                                    **
****************************************



**********************************************************************
******                                                         *******
****** Thanks to Paul Henty for the FSUIPC Client DLL          *******
******                                                         *******
**********************************************************************


Requirements:

Computer with windows 7 or higher and internet access.
Microsoft .net framework 4.6 or higher.
flightsimulator MSFS2020, P3D, FSX, (Steam) or 2004 installed.
FSUIPC installed, you can download FSUIPC free from the internet on:
http://wwww.schiratti.com/dowson.html ".
If you run FsQC on a network computer (not the computer where MSFS/p3D/FSX/FS2004 is running) you need to register WideFs in FSUIPC.
For xp users look fsqc.eu/manual.php and look for: xp computer



What this program does:

- quickly change the settings of FSX/Fs2004/P3D, such as time, date, fuel, weight, traffic etc.
- start a failure sytem, such as gear, flaps, engine, etc.
- freeze the time, so you can fly in a for everlasting sunset. 
- runway detecting system to see wich runways are in use.
- a flight analysis system, this is automaticly started when you start FsQC.
- When flight analysis is finished you can print a report, the report is automaticly saved as pdf File.
- flight analysis is finished when you parked your aicraft with the parking brakes set for more then 5 seconds.
- graphical landingchart.
- load a existing flight or flightplan.
- quickly look to your CFG (settings) files (only FSX) and change them even before the flight simulator is running.
- After a flight is finished FsQC saves your flight automaticly as 'FsQC last Flight', so you can continue the next day or hour.
- for properly working, flight analysis require always a flightplan, or use the flight planner in FsQc.
 


Flight analysis:

Flight analysis start recording at the moment when you begin taxiing.
It gives you huge information such as:

- takeoff- and landing-weight 
- takeoff roll in m. and ft.
- separate fuel consumption in taxi, climb, cruise and descent.
- maximum banking in flight
- which speed you using the flaps and gear
- when autopilot on or off 
- vertical speed on touchdown
- reverser set after landing
- wich speed you cancel reverser 
- bouncing at landing
- graphical landingchart.
- graphical chart from the entire flight
- and lots of more
You can better look the example of the pdf document.


Flight chart:

All data from the entire flight in a graphical chart.  
Long flights has seperately a climb and descent chart


Missed Approach and Touch&Go:

You can have in one flight 4 landing charts.

After you cancelled a landing by a missed approach or toch and go, you must climb out to 1100 feet above runway height (AGL)to initiate a new landing. 
So you can practice your landings much easier.



Airport information:

Fill in the ICAO and you have info such as:

- number of runways
- runway ID and heading
- runway length
- Ils ID and frq
- glideslope degrees
- surface runway
- radio freq, Tower, Ground, etc., etc.


Logbook:

- record all flights
- quickly see your flight report file
- quickly see touchdown wind info in a picture

it logs: 
- fuel consumption
- payload
- distance
- number of different airports
- flight hours
- landings
- flaps
- and lots of more
- statistics: top 5 Countries, Cities and Airports

Click on the cells for more info



You can also transfer all your FSX flights to this logbook:

download this file: littlelogbook-1_5_0.zip  on flightsim.com, 
run it and load the logbook.bin, you can find this file in your FSX flight folder, 
after that sort the row 'Start Time' by clicking on it be sure that the oldest date be on top, then export as csv file,
you must give the file this name: logbookfsx.csv, save this file in your FSX flightfolder.
Open your logbook and click button Transfer FSX logbook.



Failures:

In the settings menu you can select the kind of failures you want to occur and when they must occur.
At this moment 10 failures are possible:
-altitude
-attitude
-heading
-airspeed
-vertical speed
-pitot
-fuelleak
-flaps
-engine
-gear



Flight Planner:

A very quickly flight planner, when you not use the FS flight planner you must use the small flight planner in FsQC.
Only fill in the departure and destination ICAO.
After that click the button calculate, it calculates the distance, course and cruise altitude.
This is very handy if you use other flight planners, plan you flight with your favorite planner and after that start the flight planner of FsQC.
The departure ICAO is automaticly filled in by FsQC. (the airport where your aircraft is parked)


Limited working:

FsQC is limited, you can only fly maximum 180 nm. from Greece Irakilon, LGIR, and maximum 180 Nm. from Greece Athene, LGAV.
When you are not in the limits, the program warns you with a messagebox and flight analyzer will s1top.
So you can test the program fully before activate. 
After activate there are no limits.


Free activation:

When you register with only your email address in the activation menu you will get 15 free startups or 30 days without limitations. 
So you can test the program fully before activation. After activation there are no limits.
See the activation menu.


Activated:

When activated, the program runs only on the computer where it was activated.
You can easily change this when you want it running on another computer.
You can change this for maximum 10 times.
So when you buy another computer there's no problem at all.
You can buy a license key at www.fsqc.eu 


Reset activation:

When you run FsQC on another computer you get a message that it can only run on 1 computer, when that happens you must reset the activation, this is verry simple to do.
Go to the activate menu reset with your email and code, follow instructions given by the program, within 1 minut it's done.


Recommended:

For more easy use, run this program on a second monitor or much better on a second computer(laptop) where FSUIPC-client is running in the same network where MSFS/P3D/FSX/FS2004 is running and FSUIPC WideFs is registered.


look at www.FsQC.eu for the manual and more information.
If you have a problem look first on www.fsqc.eu/faq.php
If you have questions please contact support@fsqc.eu


