Jump to content
modest11111

Airbus A300-600, A300-600ST Beluga от IniBuilds

Recommended Posts

modest11111

Сразу две модели Airbus A300-600 и Airbus A300-600ST Beluga доступны для X-Plane 12 через iniManager.

Кстати, сейчас их можно купить всего лишь за £9.99 :
Aibus A300-600
Airbus A300-600ST 

Списки обновлений:

A300-600 v2.1.0

Flight model:
- Adjusted aerofoils to better reflect supercritical aerofoils MCRIT. Fuse body area rule adjusted on A300 F and PAX to reduce drag and better reflect performance;
- Weight and balance system changed to new XP12 payload system. This allows for better CG in A300 PAX and F along with payloads that now dynamically adjust vertically for the Beluga ST;
- Adjust engine performance to better reflect thrust output during climb and CRZ phase in XP12;
- Adjust drag profile of A300 PAX and F to better reflect flag drag;
- Adjusted Beluga ST fuel burn profile using XP12s more fine FF adjustments;
- Adjusted empty weight CG position for A300F PAX and Beluga.

Systems:
- Change flap system to work in XP12 for A300 and Beluga;
- Custom fuel flow adjusted to work in XP12 for the A300 and Beluga;
- Change EFB CG slider to work with XP 12 weight and balance;
- Adjusted start times to work with XP12 engine model;
- Updated Airac reading to work with XP12.

Art/lights:
- Updated A300 and Beluga to use XP12 lights in both the flight deck and exterior;
- Adjusted elements of flight deck to work better in XP12s lighting environment.

A300-600ST v1.1.3:

Flight model:
- Adjusted aerofoils to better reflect supercritical aerofoils MCRIT. Fuse body area rule adjusted on A300 F and PAX to reduce drag and better reflect performance;
- Weight and balance system changed to new XP12 payload system. This allows for better CG in A300 PAX and F along with payloads that now dynamically adjust vertically for the Beluga ST;
- Adjust engine performance to better reflect thrust output during climb and CRZ phase in XP12;
- Adjust drag profile of A300 PAX and F to better reflect flag drag;
- Adjusted Beluga ST fuel burn profile using XP12s more fine FF adjustments;
- Adjusted empty weight CG position for A300F PAX and Beluga;

Systems:
- Change flap system to work in XP12 for A300 and Beluga;
- Custom fuel flow adjusted to work in XP12 for the A300 and Beluga;
- Change EFB CG slider to work with XP 12 weight and balance;
- Adjusted start times to work with XP12 engine model;
- Updated Airac reading to work with XP12.

Art/lights:
- Updated A300 and Beluga to use XP12 lights in both the flight deck and exterior
- Adjusted elements of flight deck to work better in XP12s lighting environment.
 

Больше не ысародиП

Share this post


Link to post
Share on other sites
GORYNYCH

Так, для владельцев обновление бесплатное, или как ?

Share this post


Link to post
Share on other sites
X-nav
3 минуты назад, GORYNYCH пишет:

Так, для владельцев обновление бесплатное, или как ?

Да. Бесплатное. 

Share this post


Link to post
Share on other sites
GORYNYCH

Ну, хоть кто то остался людьми…

Share this post


Link to post
Share on other sites
modest11111

Обновились модели самолетов A300-600 (до версии 2.1.1), А310,  и A300-600ST Beluga (до версии 1.1.4) от iniBuilds для X-Plane 11/12.

Список изменений:

Art:
- Fixed – Nose Landing Gear lights not working;
- Fixed - Strobes too bright;
- Fixed - FO side rotaries and digital displays offset;
- Fixed - Beluga ST has all ANN lights on all the time even with switch set to BRT and DIM;
- Fixed - Beluga flight deck is green at night.

Systems:
- Fixed - Freeze computing TO Perf;
- Fixed - WX Radar not working;
- Fixed - STBY Altimeter Scale wrong when altitude high;
- Updated – AIRAC cycle;
- Fixed - SASL frame rates issue;
-Fixed - Trim is moving but not affecting flight model;
- Fixed - Fuel flow not showing and no fuel is burnt by the engines;
- Fixed - ATHR in the CRZ N1 would hunt;
- Fixed - Removed experimental flight model message;
- Fixed - FLAPS and trim not working due to changes in core sim variables;
- Fixed - A300 and Beluga weather request do not work anymore.

Flight Model
- Fixed - Adjusted Beluga ST gear placement;
- Fixed - Changed CG slider on EFB to match in sim XP12 CG variable;
- Fixed - Adjusted GE/PW engines to work correctly with engine model changes in XP12. This will give realistic start times for both the GE/PW and in-flight engine windmilling/restart behaviour. Max motor adjusted for both GE/PW to better reflect max motor N2 values.

Sound
- Fixed - Erroneous sound spaces in beluga and a300.

Список изменений для X-Plane 11:
- Fixed AIRAC bug.

Для обновления необходимо использовать iniManager, и если обновления там нет, то проверьте актуальность версии самого Manager.

На официальном сайте скидка 25% на приобретение моделей, акция продлиться одну неделю.

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...

×
×
  • Create New...