SAM

[modest11111 5910]

Обновился плагин SAM до версии 3.0.14.

Список изменений:
- New: Dark mode with 3 modes of operation: automatic depending on Time of Day (default), light, and dark;
- New: Jetway limit override feature changes. Jetway limit mode now has 3 modes of operations:
- Override globally, which would be equivalent with overrideJetwayLimits in the previous version;
- Override except when configured, which would not override on sceneries with sam.xml configured;
- Disabled.
- New: Jetway limit override factor is now configurable;
- New: Updated door configs for Toliss aircrafts;
- New: Added config for iniBuilds A300v2;
- Fix: SimBrief import does not update FollowMe selection on Departure & Arrival pages;
- Fix: Possible CTD triggered by Show Follow Me Window command;
- Other internal bugfixes.

Известные проблемы:
- Linux + Steam: There is a known issue that currently prevents SAM3 on running on this configuration, you may run into a CTD when trying to run in this configuration;
- macOS: Messages like "App is damaged and can't be opened. You should move it to trash" and similar errors may come up when trying to run Content Manager or starting X-Plane. SAM components are notarized, but the automatic deployment process, such as zipping, uploading, etc might interfere. When this happens, please run the macos_remove_attributes.sh script provided in the SAM directory from the command line, or if you have iTerm installed, you can right-click on the script and select 'Open with > iTerm'.

[modest11111 5910]

Stairport на следующей неделе планируют зарелезить собственную наземную технику, как расширение для их продукта SAM - SAM GroundService. 
 
Данная техника создается вместе с одним из лучших сценостроителей для X-Plane - ShortFinal Design (MysterX6). Обещают поддержку всех самолетов и работу в любом аэропорту. 
 
Список особенностей (взят из первоначального анонса, возможны изменения): 
- Custom animated groundservice vehicles; 
- Can be used at all airports; 
- Is compatible with any SAM-driven jetway including WorldJetways; 
- Vehicles have extended driving logic including collision protection, backup driving and cart trains; 
- Vehicles will control aircraft doors if the aircraft allows it; 
- Loading and unloading process will be handled automatically; 
- Proper UI to set up all loading services (time depends on amount of load); 
- Simbrief weights can be imported; 
- Loading affects aircraft weight in real time (instant loading available as well).

По стоимости пока информации нет.

Информация предоставлена https://vk.com/thearmchairpilotsclub

[modest11111 5910]

Stairport обновили свой плагин SAM до версии 3.1.0 и представили трейлер своего плагина наземного обслуживания - GroundService.

В новой версии SAM добавили поддержку SAM GroundService, предварительную поддержку X-Plane 12, поддержку новых самолетов, ну и само собой исправили некоторые баги.

Качаем тут: 
https://vk.cc/ccjWJK

Список изменений:
- New: Support for the new Ground Service extension;
- New: Preliminary X-Plane 12 support;
- New: New aircrafts supported;
  - Rotate MD-11;
  - JF BAe 146-100;
  - Carenado Fokker F50;
  - X-Crafts E175;
  - X-Crafts ERJ 145XR;
  - Felis B747-200;
  - Magknight 787-8/9 Dreamliner;
- Fix: Possibility of incorrect VDGS detection when 2 opposite-facing docks are next to each other (back-to-back);
- Fix: Unsafe pointer usage causing VDGS to not work completely under certain circumstances;
- Fix: SimBrief payload import gets truncated most of the time;
- Fix: Departure follow me runway selection bug, where runway and holding point selection state was not correctly initialized;
- Fix: macOS: Extension linking not working when target path already exists;
- Other internal bugfixes & optimizations.

Известные проблемы:
- Linux + Steam: There is a known issue that currently prevents SAM3 on running on this configuration, you may run into a CTD when trying to run in this configuration;
- macOS: Messages like "App is damaged and can't be opened. You should move it to trash" and similar errors may come up when trying to run Content Manager or starting X-Plane. SAM components are notarized, but the automatic deployment process, such as zipping, uploading, etc might interfere. When this happens, please run the macos_remove_attributes.sh script provided in the SAM directory from the command line, or if you have iTerm installed, you can right-click on the script and select "Open with".

Новость от наших друзей https://vk.com/thearmchairpilotsclub

 

[modest11111 5910]

Купить SAM GroundService от Stairport уже можно тут:
https://vk.cc/cck7xL

С трейлером можно ознакомиться в предыдущей записи.

Список особенностей:
- Highly detailed animated ground service vehicles done by SFD (aka MisterX) 
3 different regional sets: North America, Europe, Asia;
- Animation of Baggage/Cargo (un)loading;
- Static 3D passengers.
- Individual ground service configurations for several 3rd party aircrafts and XP default aircrafts;
- Automatic routing logic for vehicle driving including crash detection and cm-precise docking;
- Interactive services that control the aircraft load in real-time (Securing Service (Chocks, Cones), Ground Power, Passenger (Stair, Bus), Baggage (Loader, Cart), Catering, Cargo (Loader, Cart), Fueling, Crew Shuttle, Cleaning;
- Load planning via SAM menu (SimBrief import available, Instant loading available (fast track));
- Loading and Unloading process feature different service flows;
- Dependency logic for various services (Integration of SAM animated jetways including WorldJetways);
- Feature-full 10min demo via content manager.
Новость предоставлена https://vk.com/thearmchairpilotsclub

[modest11111 5910]

Stairport снова выкатили обновления для своего плагина SAM. 

Обновление доступно через менеджер плагина.

Изменения в версии 3.1.1:
- Change: Ground Service Auto parking config is now removed, users will need to choose between Stairs or Jetway configuration when loading/unloading;
- Fix: Ground Power custom command executed continuously, it's now only executed once when it's changed:
- Fix: Manual input of load service weight issue when the input value exceeds slider range;
- Fix: Rotate MD80 pylon position, GPU connection & cargo train route;
- Fix: Toliss A346 crew car return routing;
- Fix: Relaxed 2nd cargo loader spawning time for Toliss A321;
- New: Added JustFlight BAE 146 Series.

Известные проблемы:
- Linux + Steam: There is a known issue that currently prevents SAM3 on running on this configuration, you may run into a CTD when trying to run in this configuration;
- macOS: Messages like "App is damaged and can't be opened. You should move it to trash" and similar errors may come up when trying to run Content Manager or starting X-Plane. SAM components are notarized, but the automatic deployment process, such as zipping, uploading, etc might interfere. When this happens, please run the macos_remove_attributes.sh script provided in the SAM directory from the command line, or if you have iTerm installed, you can right-click on the script and select 'Open with > iTerm'.
Информация предоставлена https://vk.com/thearmchairpilotsclub

[modest11111 5910]

Stairport в ударе и в очередной раз выпустили обновление плагина SAM под версией 3.1.2 , оно доступно через Content Manager.

- Fix: Fix found for some aircrafts falling out of the sky when spawning (FlightFactor ACFs, for example);
- To fix this issue, set "Override Weights On Flight Load" to false in the options menu;
- Alternatively, delete Output/preferences/sam/settings.json setting file to regenerate fresh;
- The option's default value is now set to false;
- New: Enabled cargo service for Toliss A321 + added chocks;
- New: Added Sparky B744 GroundService config;
- New/Fix: Implemented traffic handling timeout, vehicles stuck for some time will ignore traffic for a short while;
- New/Fix: Adjusted catering animation for all configs;
- Added new "doors" animation to sequence;
- Adjusted active "height" value for IXEG/LVLUP 737;
- Fixed some cases where "height" happens before "deployed";
- Fix: Ground Power is now disabled automatically when the flight is starting;
- Fix: Stairs & boarding ramps not clearing when the flight starts & keepStairsConnectedAfterLoading option is true;
- Fix: Vehicles configured to spawn at docked position not spawning when importing SimBrief flight plan;
- Fix: Fixed an issue where loading/unloading counter is not updating for some services;
- Fix: Felis 742 Cargo loader spawning;
- Fix: Fuel not loading for Rotate MD11;
- Fix: Toliss A319 door animations and cargo loading speed;
- Fix: Several ground service UI issues;
- Preflight section does not show "Loading Finished" when loading is finished;
- Arrival Reset Flight button not showing up after deboarding is finished;
- Arrival Jetway vs Stairs selection showing up while the flight is in progress.

Информация предоставлена https://vk.com/thearmchairpilotsclub

[Dj.dan.mc 3]

В стиме появился SAM GroundService но цена не сказать чтобы сильно демократическая.

[modest11111 5910]

Stairport справляет очередную порцию ошибок, выпуская обновление для плагина SAM. Версия идёт под номером 3.1.3 и оно доступно через Content Manager.

Список изменений:

- New: Unloading support for situations where the user spawns mid-flight using the same aircraft after experiencing CTD while flying;
- Fix: Pax not (un)loading when jetway parking config is selected (on Autogate jetways for example);
- Fix: Aircraft width code detection incorrect for aircraft with wingspan near the limit of their class;
- Fix: Ground Air toggle is now hidden in the UI when HPU is not configured;
- Fix: GroundService SubObject trigger bugs;

Изменения конфигураций для моделей самолётов:
 
- Deleted HPU wherever not being available;
 - Sparky 747 : fixed loader height, added crew + cleaning service;
 - LVLUP/Zibo/Default 737: Slightly moved carts to make room for baggage handler;
 - Added configs for iniBuilds A310 PAX + VIP;
 - Added tanks to iniBuilds A300v2 PAX + more animation tweaks.

 Известные проблемы:

- Linux + Steam: There is a known issue that currently prevents SAM3 on running on this configuration, you may run into a CTD when trying to run in this configuration;
- macOS: Messages like "App is damaged and can't be opened. You should move it to trash" and similar errors may come up when trying to run Content Manager or starting X-Plane. SAM components are notarized, but the automatic deployment process, such as zipping, uploading, etc might interfere. When this happens, please run the macos_remove_attributes.sh script provided in the SAM directory from the command line, or if you have iTerm installed, you can right-click on the script and select 'Open with > iTerm'. 
Информация предоставлена https://vk.com/thearmchairpilotsclub

[modest11111 5910]

Stairport продолжает улучшать свой плагин SAM и выпустил обновление, версия 3.1.4.

Особенности обновления:
- New: GroundService options overlay that includes CG adjustment slider;
- New: Implemented custom loading event hooks for Toliss A319, A321 & A340 aircraft for better support;
- Change: Fuel slider is now hidden when tank configuration is not found for the acf;
- Fix: Fixed several issues relating to refueling;
- Fix: PAX deboarding when SAM jetway is still moving;
- Fix: Issues with carts not returning on some configurations.

Известные проблемы:
- Linux + Steam: There is a known issue that currently prevents SAM3 on running on this configuration, you may run into a CTD when trying to run in this configuration.
- macOS: Messages like "App is damaged and can't be opened. You should move it to trash" and similar errors may come up when trying to run Content Manager or starting X-Plane. SAM components are notarized, but the automatic deployment process, such as zipping, uploading, etc might interfere. When this happens, please run the `macos_remove_attributes.sh` script provided in the SAM directory from the command line, or if you have iTerm installed, you can right-click on the script and select 'Open with > iTerm'.

Информация предоставлена https://vk.com/thearmchairpilotsclub

[modest11111 5910]

Stairport обновили плагин SAM до версии 3.1.5, обновление доступно через Content Manager.
 
Список изменений:
- Change/Fix: Improved airport detection accuracy by dropping support for helipads & seabases as SAM currently doesn't handle them yet;
- Change: Tweaked how the empty weight of aircraft is calculated. It's now possible to add an extra weight that would be added to the value taken from .acf file/dataref, configured per-aircraft in the XML;
- Change: Reduced vehicle roll effect when turning a bit;
- Fix: SimBrief import tweaks to make imported weight config closer to SimBrief's values;
- Fix: Fixed Catering & Passenger services not emitting (un)loading events causing ToLiss loading to fail sometimes;
- Fix: Incorrect CateringService custom logic causing loading to not be completed in certain cases;
- Fix: Fixed an edge case where stair-mapped buses may be spawned before Crew & Cleaning services has finished;
- Fix: Fixed edge cases where ground handling vehicles may appear after (un)loading is finished;
- Other minor fixes.

Обновлены конфиги самолетов: 
 - ToLiss A319: implemented chock triggers;
 - ToLiss A321: updated pax/baggage weight & fuel tank capacity, added base extra weight config, implemented chock triggers;
 - ToLiss A340: added base extra weight config, implemented chock triggers;
 - iniBuilds A300 v2 PAX: Corrected vehicle docking positions;
 - iniBuilds A300 v2 CARGO: Added fuel service;
 - FlightFactor A350: updated vehicle docking positions;
 - Felis B742: fixed vehicle clipping issue;
 - Rotate MD11: fixed chock positions;
 - X-Crafts E175/195: updated cargo service speed;
 - Magknight B789: corrected vehicle & chock positions;

Добавлены конфиги:
- X-Hangar G550.

Известные баги: 
- Linux + Steam: There is a known issue that currently prevents SAM3 on running on this configuration, you may run into a CTD when trying to run in this configuration. 
- macOS: Messages like "App is damaged and can't be opened. You should move it to trash" and similar errors may come up when trying to run Content Manager or starting X-Plane. SAM components are notarized, but the automatic deployment process, such as zipping, uploading, etc might interfere. When this happens, please run the macos_remove_attributes.sh script provided in the SAM directory from the command line, or if you have iTerm installed, you can right-click on the script and select 'Open with > iTerm'.

[modest11111 5910]

Очередное обновление SAM Plugin от Stairport.

Версия 3.1.6 доступна для загрузки в менеджере.

Список изменений:
- Fix: Fixed a possible cause for the jetway sound still playing after disconnecting;
- Fix: Fixed departure & parking states not refreshed when reloading a flight on the same airport;
- Fix/tune: Tuned departure spawn point logic to prevent vehicle spawning at the opposite end of the terminal when requesting departure guidance from a ramp;
- Aircraft config updates:
- Default 738: Updated ground power control;
- Felis B742: deleted Felis B742 gpu in favor of the new Felis tablet options;
- New aircraft config:
- Zibo B738.

Известные проблемы:
- Linux + Steam: There is a known issue that currently prevents SAM3 on running on this configuration, you may run into a CTD when trying to run in this configuration.
- macOS: Messages like "App is damaged and can't be opened. You should move it to trash" and similar errors may come up when trying to run Content Manager or starting X-Plane. SAM components are notarized, but the automatic deployment process, such as zipping, uploading, etc might interfere. When this happens, please run the macos_remove_attributes.sh script provided in the SAM directory from the command line, or if you have iTerm installed, you can right-click on the script and select 'Open with > iTerm'.

Информация предоставлена https://vk.com/thearmchairpilotsclub

[modest11111 5910]

Плагин SAM от Stairport обновился до версии 3.1.7.
Скачать обновление можно в Content Manager.

Особенности обновления:
- Fix: A bug in dock detection logic that can cause X-Plane to freeze under some conditions that, particularly when landing & taxiing in airports with many docks;
- Fix: Vertical speed dataref can sometime become invalid, causing CTD under some conditions;
- New: Updates shall now be served by a CDN to improve connection reliability.

Известные проблемы:
- Linux + Steam: There is a known issue that currently prevents SAM3 on running on this configuration, you may run into a CTD when trying to run in this configuration.
- macOS: Messages like "App is damaged and can't be opened. You should move it to trash" and similar errors may come up when trying to run Content Manager or starting X-Plane. SAM components are notarized, but the automatic deployment process, such as zipping, uploading, etc might interfere. When this happens, please run the macos_remove_attributes.sh script provided in the SAM directory from the command line, or if you have iTerm installed, you can right-click on the script and select 'Open with > iTerm'.

[modest11111 5910]

Stairport выпустили очередное обновление SAM Plagin до версии 3.1.8.

Особенности обновления:
- Fix: Dataref control icon not showing on SAM UI toolbar when arriving at an airport with custom datarefs implemented;
- Fix: GroundService baggage slider not movable when importing a Simbrief flightplan that's using a custom airframe with baggage weight defined as 0. Now the unit baggage weight will be set to aircraft's configured default as long as the imported unit pax weight != 0;
- Fix: Updated Toliss A340 config to be compatible with aircraft version 1.1;
- New: Implemented audio announcement when (un)loading process is finished. Requires GroundSevice v1.0.3;
- New: Visual only mode; aircraft loadout & datarefs will not be touched in this mode, GS will only show the animations. The flag can be configured from GroundService settings page;
- New: Added AD Simulations CRJ700/900 configs.

Известные проблемы:
- Linux + Steam: There is a known issue that currently prevents SAM3 on running on this configuration, you may run into a CTD when trying to run in this configuration.
- macOS: Messages like "App is damaged and can't be opened. You should move it to trash" and similar errors may come up when trying to run Content Manager or starting X-Plane. SAM components are notarized, but the automatic deployment process, such as zipping, uploading, etc might interfere. When this happens, please run the macos_remove_attributes.sh script provided in the SAM directory from the command line, or if you have iTerm installed, you can right-click on the script and select 'Open with > iTerm'.

Информация предоставлена https://vk.com/thearmchairpilotsclub

[Granin063 3]

Добрый день!

Установил сценарий UUEE 2021 от X-FLIGHTS. При запуске Ту-154 от Felis кнопка плагина SAM находится прямо на кнопкой MENU фелисовского самолета. В итоге она не нажимается! Вместо этого открывается окно плагина SAM.

Подскажите как решить?

[modest11111 5910]

Stairport выпустили очередное обновление SAM Plagin до версии 3.1.9.

Список изменений:
- New: Aircraft can now have multiple configurations, with a tag system that matches livery names;
- Fix: Fixed Aircraft xml config node query/selection not handling some characters correctly, causing warning, or even CTD in some cases;
- Fix: Buses driving with people stuck to the outside & loaders driving with bags stuck on it;

Aircraft config updates:
- New: FlightFactor B764;
- New: FlightFactor B767 freighter & SF;
- FlightFactor B757 series: tweaked door positions;
- New: Thranda Kodiak init config to prevent CTDs;
- New: Default XP12 Citation initial config;

New seating configs for:
- 737-800 series;
- ToLiss A21N;
- ToLiss A321;
- ToLiss A319;
- FF A320;
- FF B753;
- FF B763.

Известные проблемы:
- Linux + Steam: There is a known issue that currently prevents SAM3 on running on this configuration, you may run into a CTD when trying to run in this configuration.
- macOS: Messages like "App is damaged and can't be opened. You should move it to trash" and similar errors may come up when trying to run Content Manager or starting X-Plane. SAM components are notarized, but the automatic deployment process, such as zipping, uploading, etc might interfere. When this happens, please run the macos_remove_attributes.sh script provided in the SAM directory from the command line, or if you have iTerm installed, you can right-click on the script and select 'Open with > iTerm'.

https://vk.com/thearmchairpilotsclub

[alex40 3]

Подскажите пожалуйста где можно скачать SAM FollowMe?

 

 

[alex40 3]

В 07.09.2022 в 14:08, modest11111 пишет:

Скрытый текст

 

Stairport выпустили очередное обновление SAM Plagin до версии 3.1.9.

Список изменений:
- New: Aircraft can now have multiple configurations, with a tag system that matches livery names;
- Fix: Fixed Aircraft xml config node query/selection not handling some characters correctly, causing warning, or even CTD in some cases;
- Fix: Buses driving with people stuck to the outside & loaders driving with bags stuck on it;

Aircraft config updates:
- New: FlightFactor B764;
- New: FlightFactor B767 freighter & SF;
- FlightFactor B757 series: tweaked door positions;
- New: Thranda Kodiak init config to prevent CTDs;
- New: Default XP12 Citation initial config;

New seating configs for:
- 737-800 series;
- ToLiss A21N;
- ToLiss A321;
- ToLiss A319;
- FF A320;
- FF B753;
- FF B763.

Известные проблемы:
- Linux + Steam: There is a known issue that currently prevents SAM3 on running on this configuration, you may run into a CTD when trying to run in this configuration.
- macOS: Messages like "App is damaged and can't be opened. You should move it to trash" and similar errors may come up when trying to run Content Manager or starting X-Plane. SAM components are notarized, but the automatic deployment process, such as zipping, uploading, etc might interfere. When this happens, please run the macos_remove_attributes.sh script provided in the SAM directory from the command line, or if you have iTerm installed, you can right-click on the script and select 'Open with > iTerm'.

https://vk.com/thearmchairpilotsclub

 

 

Подскажите пожалуйста в SAM встроена версия follow me версия 1.0.4.демо версия работает до 10 мин.

А в продаже отдельно плагин SAM с таким же названием версия  3.1.10. Это тот же самый плагин или они разные?

[exPLUTO 0]

Всем привет, вопрос как подружить плагин и самолеты Flight Factor что бы он не задирал носовую стойку, как правильно его грузить (сначала через SAM а потом через EFB или наоборот?) и какие настройки нужны в плагине?