Поддержите существование нашего сайта

FS2004/FSX Flight Analyzer Utility V2.04 Просмотр ZIP-архива


Имя файла Дата Размер
example_main_window.jpg 13.02.2018 23:24 48 KB
example_pdf_rapport_page1.jpg 20.02.2018 03:18 1 MB
example_pdf_rapport_page2.jpg 20.02.2018 03:20 844 KB
failuresettings.ini 15.02.2018 23:10 158 B
FsQC.CFG 18.02.2018 21:05 898 B
FsQC204.gif 13.02.2018 23:16 11 KB
FsQuickChange.exe 06.03.2018 00:32 508 KB
FSUIPCClient.dll 12.06.2013 03:13 64 KB
Manual FsQC.pdf 26.02.2018 14:44 213 KB
PdfSharp-WPF.dll 24.11.2009 19:40 624 KB
readme.txt 06.03.2018 00:30 4 KB
RR.jpg 11.04.2017 20:54 15 KB
settings.ini 06.03.2018 00:27 67 B
Flight Reports/ 06.03.2018 00:34
Flight Reports/example __LGIR-to-LGAV__13-2-2018__18-46.pdf 13.02.2018 21:46 75 KB
temp/ 06.03.2018 00:34
updates/ 05.03.2018 00:40
description.txt 06.03.2018 00:37 3 KB
example_flght_analysis.jpg 13.02.2018 23:23 310 KB
example_landingchart.jpg 13.02.2018 23:22 18 KB
avsim_su.diz 06.03.2018 00:37 310 B
Итого: 4 MB

What this program do:

- quickly change the settings of FSX/Fs2004, such as time, date, fuel, weight, traffic etc.
- start a failure sytem, such as gear, flaps, engine, etc.
- freeze the time, so you can fly in a for everlasting sunset.
- runway detecting system to see wich runways are in use.
- a flight analysis system, this is automaticly started when you start FsQC.
- When flight analysis is finished you can print a report, the report is automaticly saved as pdf File.
- flight analysis is finished when you parked your aicraft with the parking brakes set for more then 5 seconds.
- graphical landingchart.
- load a existing flight or flightplan.
- quickly look to your CFG (settings) files (only FSX) and change them even before the flight simulator is running.
- After a flight is finished FsQC saves your flight automaticly as 'FsQC last Flight', so you can continue the next day or hour.
- for properly working, flight analysis require a fsx/fs2004 flightplan.

Flight analysis:

Flight analysis start recording at the moment when you begin taxiing.
It gives you huge information such as:

- takeoff- and landing-weight
- takeoff roll in m. or ft.
- separate fuel consumption in taxi, climb, cruise and descent.
- maximum banking in flight
- which speed you using the flaps and gear
- when autopilot on or off
- vertical speed on touchdown
- reverser set after landing
- wich speed you cancel reverser
- bouncing at landing
- graphical landingchart.
- and lots of more
You can better look the example of the pdf document located in the 'Flight Reports' folder.


In the settings menu you can select the kind of failures you want to occur and when they must occur.
At this moment 10 failures are possible:
-vertical speed


For more easy use, run this program on a second monitor or much better on a second computer(laptop) where FSUIPC-client is running in the same network where FSX/FS2000 is running and FSUIPC WideFs is registered.

See also the pdf Manual.
Also look at www.FsQC.eu for more information.
If you have a problem look first on www.fsqc.eu/faq.html
If you have questions please contact support@fsqc.eu
→ Размер: 2 MB
→ Дата: 4 года назад (06.03.2018 09:06)
→ Автор: Evander Tholen
→ Разрешил модератор: Jhenya
→ Лицензия: Лицензия поставляется в архиве
→ Скачан: 245 раз